nur lump in r33 - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

tommo · 30th June 2008, 05:18 PM

swapping my knackered lump for a nur engine.because it is a r34 engine i know i need to swap the sump and use a r34 cas.been told to swap the wires round to run this engine.could any 1 confirm this and has any 1 any info on pdf or website.

moffett · 2nd July 2008, 02:07 PM

or do what I done and use your old cas and exhaust cam and then you dont have to swap the wires. You also need to use your old ignition system

hodgie · 2nd July 2008, 02:10 PM

Yep you`ll need your Diff and the wires on the CAS are reversed.

tommo · 2nd July 2008, 05:46 PM

old cam was damaged so not able to use that.i hava a r34 cas to go on the engine.hopefully it will be simple i hope.unless you have any other tips.

Ian C · 2nd July 2008, 07:45 PM

the wire swap is extremely easy. the connector comes to pieces, then reverse the order and reassemble!
Done

30th June 2008, 05:18 PM	#1 (permalink)
tommo GTR Register Member Join Date: Sep 2006 Posts: 69	nur lump in r33 swapping my knackered lump for a nur engine.because it is a r34 engine i know i need to swap the sump and use a r34 cas.been told to swap the wires round to run this engine.could any 1 confirm this and has any 1 any info on pdf or website.

2nd July 2008, 02:10 PM	#3 (permalink)
hodgie MODERATOR Join Date: Oct 2003 Location: Sat in my Car Posts: 4,696	Yep you`ll need your Diff and the wires on the CAS are reversed. __________________ 720 spinner at Spa, GTROC Southern Trackday Organiser, GTROC SW Rep. Hodgies Skyline GTR Site --

2nd July 2008, 05:46 PM	#4 (permalink)
tommo GTR Register Member Join Date: Sep 2006 Posts: 69	engine swap old cam was damaged so not able to use that.i hava a r34 cas to go on the engine.hopefully it will be simple i hope.unless you have any other tips.

2nd July 2008, 07:45 PM	#5 (permalink)
Ian C GTROC Member Join Date: Jun 2003 Location: Buckingham Posts: 1,257	the wire swap is extremely easy. the connector comes to pieces, then reverse the order and reassemble! Done __________________ +10 extra bhp for £55.... Get your baffled TWIN TURBO pipe now from GTR.co.uk Shop

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

2nd July 2008, 02:07 PM	#2 (permalink)
moffett GTR Register Member Join Date: Nov 2007 Location: norn iron Posts: 371	or do what I done and use your old cas and exhaust cam and then you dont have to swap the wires. You also need to use your old ignition system