Stagea wheel studs! - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

paul palmer · 30th June 2008, 06:48 PM

I have recently bought a set of LM GT Alloys for my Stagea and although they fit fine i cant get a wheel nut brace onto the nuts to tighten them as the apperture is to tight, are there nuts available that will allow me to do this?. I hope there is as otherwise i am buggered!!

Thanks

Paul.

jonny8ball · 30th June 2008, 07:54 PM

Nismo nuts and a socket works fine with lm gt wheels on stageas. Have you tryed wheel sockets rather than spending money on new nuts as there not cheap!

Halfords sell slim sockets for wheels and they have a protective sleeve so they don't mark your rims. Think its the red sleeve one ya need!

paul palmer · 30th June 2008, 08:37 PM

Thanks,I will give them a try, it was really tight getting the nuts on without brace!!, but may invest in a set of nuts with a hex end so can tighten from the end of the nut as against the side! if that makes sense?

RSVFOUR · 30th June 2008, 08:57 PM

As johnny says a socket is much cheaper than wheel nuts.

You do need to be careful when tightening up the nuts as stagea studs are not as strong as skyline ones although they are the same size thread. The shoulders are thinner - I beleive they are the same as a pulsar.

Not a problem till you break one by overtightening like I did.

paul palmer · 30th June 2008, 09:07 PM

thanks guys, i will give halfords a try. Is there a link to the Stagea owners club so that i can join?.

vss irvine · 2nd July 2008, 10:40 PM

i use these on my stagea, but in black.

ive bought a few sets for pulsars from this seller aswell.

eBay Motors: RED TUNER LUG NUTS WHEELS 12MM 1.25 FOR NISSAN WRX OPEN (item 180228576012 end time Jul-27-08 20:48:45 PDT)

30th June 2008, 06:48 PM	#1 (permalink)
paul palmer GTR Register Member Join Date: Jan 2002 Location: Banbury, Oxfordshire Posts: 959	Stagea wheel studs! I have recently bought a set of LM GT Alloys for my Stagea and although they fit fine i cant get a wheel nut brace onto the nuts to tighten them as the apperture is to tight, are there nuts available that will allow me to do this?. I hope there is as otherwise i am buggered!! Thanks Paul.

30th June 2008, 08:37 PM	#3 (permalink)
paul palmer GTR Register Member Join Date: Jan 2002 Location: Banbury, Oxfordshire Posts: 959	nuts! Thanks,I will give them a try, it was really tight getting the nuts on without brace!!, but may invest in a set of nuts with a hex end so can tighten from the end of the nut as against the side! if that makes sense?

30th June 2008, 08:57 PM	#4 (permalink)
RSVFOUR GTROC Member Join Date: May 2006 Location: On the wall MAY 2008 Posts: 808	As johnny says a socket is much cheaper than wheel nuts. You do need to be careful when tightening up the nuts as stagea studs are not as strong as skyline ones although they are the same size thread. The shoulders are thinner - I beleive they are the same as a pulsar. Not a problem till you break one by overtightening like I did. __________________ RSV Four FFC (Flying Fridge Carrier...... now with twin turbos)

30th June 2008, 09:07 PM	#5 (permalink)
paul palmer GTR Register Member Join Date: Jan 2002 Location: Banbury, Oxfordshire Posts: 959	nuts thanks guys, i will give halfords a try. Is there a link to the Stagea owners club so that i can join?.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

30th June 2008, 07:54 PM	#2 (permalink)
jonny8ball N.Ireland Join Date: Aug 2007 Location: N.Ireland Posts: 79	Nismo nuts and a socket works fine with lm gt wheels on stageas. Have you tryed wheel sockets rather than spending money on new nuts as there not cheap! Halfords sell slim sockets for wheels and they have a protective sleeve so they don't mark your rims. Think its the red sleeve one ya need!

2nd July 2008, 10:40 PM	#6 (permalink)
vss irvine GTR Register Member Join Date: Feb 2008 Location: ayrshire, scotland Posts: 13	i use these on my stagea, but in black. ive bought a few sets for pulsars from this seller aswell. eBay Motors: RED TUNER LUG NUTS WHEELS 12MM 1.25 FOR NISSAN WRX OPEN (item 180228576012 end time Jul-27-08 20:48:45 PDT)