|
|
#1 (permalink) |
|
GTR Register Member
|
Single turbo Oil and water feed
Hi
i'am building my R32 GTR to single turbo.. GT35 and i'am only missing some photos of the oil feed and were to take the water for the cooling, can some one help whith some photos ore some knowledge ? i'am also wondering what to do whith the 2 pipes that are comming from the plennum and round in the back of the engine to the exhaust side, think it's water and maby vaccum lines ?? hope you understand (-: Cheers Anders Denmark |
|
|
|
|
|
#2 (permalink) |
|
GTR Register Member
|
I used the oil supply port in the block, that normally splits into 2 to supply the 2 factory turbo's, to supply oil to the single & then returned into one of the factory returns and blocked up the other.
Im pretty sure I did the same kind of thing with the water, Tapped into the iriginal supply ,but honestly cant remember. ![]() Last edited by GT-R Glenn; 11th July 2008 at 10:40 PM. |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|