Replacment 2 piece rotors r33 GTR um Help :)

[SklyaFett]

The car is a 95 GTR non v-spec

It has a 2 piece disc setup. It has the standard brembos on. Iv taken the wheel off and done some measurements. The hat is about 200mm in width give or take 5mm. It has 10 bolts going into the disc's themselves and it is 57 mm from the centre of each nut screw thing to the next in a straight line. The discs are 28mm thick and about 328 mm from widest points. The hat is purple also.

Don't want to go back to standards but cost is an problem at the mo.

I also need the front cv boot set also ( 4 in total )

any help would be great
pic of the wheel and disc
http://i298.photobucket.com/albums/m...066_3_full.jpg

I need these in the next week or so