drivers side electric window motor r33 - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

par · 19th July 2008, 11:20 AM

hi im after a drivers side window motor for a m reg r33 gtr

ddavej · 19th July 2008, 03:06 PM

Make sure you've got power going to the motor, if you have then have you tried stripping it and cleaning it up inside? I've had several lately that we've cleaned & repaired quite easily..........always worth a try

Dave.

gts dan · 19th July 2008, 08:17 PM

if that doesnt work then i have one

par · 21st July 2008, 04:33 PM

The motor definately has power going to it! I stripped the door panel off i can then see the end of the motor through a hole then gave it a sharp bang and it started again but it keeps stopping! Im really not sure how to get the motor out if you could give me a walk through i could give it a proper clean or replace myself

Thanks ina dvance

ddavej · 21st July 2008, 08:59 PM

I can't remember how they are held in but there should be a guide somewhere on this site. If it works when you tap it then you should be able to save it, i'll PM you my number.
Dave.

19th July 2008, 11:20 AM	#1 (permalink)
par GTR Register Member Join Date: Oct 2006 Posts: 38	drivers side electric window motor r33 hi im after a drivers side window motor for a m reg r33 gtr

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

19th July 2008, 03:06 PM	#2 (permalink)
ddavej dave_j Join Date: Jan 2006 Location: South Wales Posts: 321	Make sure you've got power going to the motor, if you have then have you tried stripping it and cleaning it up inside? I've had several lately that we've cleaned & repaired quite easily..........always worth a try Dave.

19th July 2008, 08:17 PM	#3 (permalink)
gts dan GTR Register Member Join Date: Apr 2005 Location: Chichester Posts: 247	if that doesnt work then i have one

21st July 2008, 04:33 PM	#4 (permalink)
par GTR Register Member Join Date: Oct 2006 Posts: 38	The motor definately has power going to it! I stripped the door panel off i can then see the end of the motor through a hole then gave it a sharp bang and it started again but it keeps stopping! Im really not sure how to get the motor out if you could give me a walk through i could give it a proper clean or replace myself Thanks ina dvance

21st July 2008, 08:59 PM	#5 (permalink)
ddavej dave_j Join Date: Jan 2006 Location: South Wales Posts: 321	I can't remember how they are held in but there should be a guide somewhere on this site. If it works when you tap it then you should be able to save it, i'll PM you my number. Dave.