R.I.P.S 10 second stock internal RB30 GTS4 gets a feature - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

R.I.P.S NZ · 2nd August 2008, 03:18 AM

A GTS4 we built quite some time ago got a feature in last months NZ performance car magazine.

This was one for our first 4wd RB30 builds and its been a reliable 10 second street carever since.
When we built it the motor spec was:
Totally stock internal RB30 with new rings and bearings only.
RIPS 4wd adapter kit
RIPS high capacity sump
RIPS inlet plenim
RIPS exhaust manifold with T66
Stock R32 RB25de head with stock N/A cams and springs
75hp wet NOS kit
Stock gearbox with RIPS steel flywheel and tripple plate clutch.
Stock diffs
Stock suspension

Here's a couple of early vids of it:

YouTube - RIPS skyline stock internal motor 10 second 1/4

YouTube - RIPS RB30 GTS4 burnout starting in 4th

I got a 10.97 @ 124mph from it first time out and on street tyres.
The guy I built it for sold it about a year ago, the new owner has given the motor a freshen up, done some head work, cams etc and he has since done a 10.89 @ 130mph, here's the story:

Next time someone tells you, you must have forged pistons, aftermarket rods, headwork, cams, valve springs, gearbox upgrades etc to run 10s in a street GTS4/GTR, it might pay to show them this.

Rob

Wanabee Kiwi · 3rd August 2008, 12:30 PM

You should see the guys mug shot that owns this.....

2nd August 2008, 03:18 AM	#1 (permalink)
R.I.P.S NZ GTR Register Member Join Date: May 2004 Location: Rotorua NZ Posts: 2,205	R.I.P.S 10 second stock internal RB30 GTS4 gets a feature A GTS4 we built quite some time ago got a feature in last months NZ performance car magazine. This was one for our first 4wd RB30 builds and its been a reliable 10 second street carever since. When we built it the motor spec was: Totally stock internal RB30 with new rings and bearings only. RIPS 4wd adapter kit RIPS high capacity sump RIPS inlet plenim RIPS exhaust manifold with T66 Stock R32 RB25de head with stock N/A cams and springs 75hp wet NOS kit Stock gearbox with RIPS steel flywheel and tripple plate clutch. Stock diffs Stock suspension Here's a couple of early vids of it: YouTube - RIPS skyline stock internal motor 10 second 1/4 YouTube - RIPS RB30 GTS4 burnout starting in 4th I got a 10.97 @ 124mph from it first time out and on street tyres. The guy I built it for sold it about a year ago, the new owner has given the motor a freshen up, done some head work, cams etc and he has since done a 10.89 @ 130mph, here's the story: Next time someone tells you, you must have forged pistons, aftermarket rods, headwork, cams, valve springs, gearbox upgrades etc to run 10s in a street GTS4/GTR, it might pay to show them this. Rob __________________ R34 GTR: Quickest street trim skyline in NZ, 9.7 @ 137 on 1st test pass, first meeting in the UK, 10.4 @ 144. 240z, WRH8.71 / 162 @ 2 bar, stock crank, full street trim 1972 240z, RIPS RB30, quickest/fastest Jap street car in NZ 8.71/162mph 2 bar, No NOS, street tyres. RB engine building, alloy and stainless fabrication, affordable skyline tuning and high capacity repowers, worldwide shipping arranged. e-mail rips@inspire.net.nz www.ripsltd.com

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

3rd August 2008, 12:30 PM	#2 (permalink)
Wanabee Kiwi GTR Register Member Join Date: Mar 2007 Location: Christchurch NZ / Oxfordshire Posts: 542	You should see the guys mug shot that owns this.....