3rd September 2008, 01:38 PM
|
#1 (permalink) |
|
GTR Register Member
Join Date: Mar 2006
Location: IOM
Posts: 81
|
1998-1999 UK GTR33 Vspec for sale
I have a GTR33 V spec 1998-1999 uk model supplied by middlehurst in Black.
Modifications as follows: HKS induction and complete hard pipe kit NISMO AFM's HKS2530's HKS Stainless manifolds Trust power extream exhaust HKS Cams HKS Vernier cam gears/pulleys TOMEI gasket kit HKS Head studs Greddy oil catch tank Splitfire coil packs Sard 1000cc injectors TOMEI fuel rail HKS or NISMO FPR Apexi race radiator and intercooler Apexi boost controller Apexi power fc and commander Greddy and NISMO Gauges OSG Twin plate clutch O/H gear box less than 2000miles Tein Mono Flex coil overs and EDFC CE28n's 265x35x18 offset 10.5 (i think) The bottom end needs a new crank, rods, pistons and oil pump. The buyer would also need to get a set of turbos. I have receipts and service history for all the work carried out over the last 2.5 years The car is at RB motorsport at the moment, but i have decided to sell as is or with a donor engine. If anyones interested please PM me. |
|
|
|
3rd September 2008, 08:00 PM
|
#3 (permalink) |
|
Administrator
Join Date: Jun 2003
Location: In the bushes, watching YOU!!!
Posts: 7,522
|
Price?
__________________
I'd love to stop and chat, but you're an idiot. Ich liebe die Grüne Hölle. Only ABBEY MOTORSPORT, CATDT and SPINAL TAP go up to eleven! Don't ask a stupid question, try FAQ and Search first. |
|
|
|
|
4th September 2008, 04:41 PM
|
#4 (permalink) | |
|
GTR Register Member
Join Date: Mar 2006
Location: IOM
Posts: 81
|
Quote:
RB's have sourced a short block for me which is fitted with N1 pistons, rods, oil and water pumps and was built by GTArt not long ago. the engine will be checked over at RB's and fitted to the car. The head is also going to be overhauled with new seals,TOMEI gasket kit etc. and a joyce of turbos. In answer to some questions i don't have any pictures of the car but will get some posted when all work is completed. Price will depend on what the new owner want's re preformance parts fitted or taken off and the engine made more or less standard. Thanks Cameron |
|
|
|
|
|
29th September 2008, 10:22 AM
|
#5 (permalink) |
|
GTR Register Member
Join Date: Mar 2006
Location: IOM
Posts: 81
|
Update on Engine and sale
The Engine is now being rebulit by RB's and will include the following new parts:
Rebore block and machine head to 2.7 ltr crank dowell + spigot bush Dynamically balance crank , flywheel,front pulley N1 oil pump + gaskets Oil pressure sender unit Tomei 1.2mm metal gasket set 2 x cam seals 1 x rear crank seal 2860 turbo units x 2 + gasket set Nismo con rod bearings Nismo main bearing set tomei con rod set 24 valve stem oil seals Trust iridium plugs x 6 Trust reinforced timing belt Nissan crank shaft TOMEI oil baffle kit TOMEI forged pistons New oil cooler The car should be ready in approx 1.5 weeks at which time i will post pictures and the price. Thanks Cam |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
