Rear inner drive flanges R32GTR/R33 GTSt - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

R32 Combat · 5th September 2008, 09:18 AM

I'm after a rear inner drive flange, the bit of the inner CV's that slids into the diff, off a R32 GTR or R33 GTSt. This is the R200 diff.

They are different. There is a long one and a short one. I need the short one.

Can anyone help me?

It's for my bike engine mini project.

Thanks

Andy

Abbey M/S · 5th September 2008, 09:43 AM

early or late type diff?

R32 Combat · 5th September 2008, 11:05 AM

Bugger, I don't know, The Diff is from a R32 GTR. Does that help? I have one to compare. Whats the difference?

Abbey M/S · 5th September 2008, 12:27 PM

measure the approx spline O/D and the O/D of the part of the shaft that goes in the bearing.

R32 Combat · 5th September 2008, 05:32 PM

The spline O/D reads 30.92mm and the bearing dia is 31.92mm

Thanks

Andy

ANDY H · 5th September 2008, 07:05 PM

i have a pair of brand new ones! cheap!

R32 Combat · 5th September 2008, 07:33 PM

I'm really only after this 1, but how much for a pair? Bearing in mind the diff and flanges I have I got for free!!!

ANDY H · 5th September 2008, 07:50 PM

£50 the pair?

R32 Combat · 5th September 2008, 07:55 PM

Are they the same sizes as the one I have? Sizes are a few posts above^^

ANDY H · 5th September 2008, 07:59 PM

i will check tomorrow! as i dont have any calipers at home!
i think i have your mob number! is it still the same one?

5th September 2008, 09:18 AM	#1 (permalink)
R32 Combat New Users Join Date: Jan 2004 Location: Berkshire Posts: 4,332	Rear inner drive flanges R32GTR/R33 GTSt I'm after a rear inner drive flange, the bit of the inner CV's that slids into the diff, off a R32 GTR or R33 GTSt. This is the R200 diff. They are different. There is a long one and a short one. I need the short one. Can anyone help me? It's for my bike engine mini project. Thanks Andy

5th September 2008, 07:05 PM	#6 (permalink)
ANDY H GTR Register Member Join Date: Mar 2005 Location: maidstone Posts: 1,231	i have a pair of brand new ones! cheap! __________________ The bull sh*t stops when the flag drops!

5th September 2008, 07:50 PM	#8 (permalink)
ANDY H GTR Register Member Join Date: Mar 2005 Location: maidstone Posts: 1,231	£50 the pair? __________________ The bull sh*t stops when the flag drops!

5th September 2008, 07:59 PM	#10 (permalink)
ANDY H GTR Register Member Join Date: Mar 2005 Location: maidstone Posts: 1,231	i will check tomorrow! as i dont have any calipers at home! i think i have your mob number! is it still the same one? __________________ The bull sh*t stops when the flag drops!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

5th September 2008, 09:43 AM	#2 (permalink)
Abbey M/S GTR Register Member Join Date: Feb 2002 Location: The workshop... Posts: 1,915	early or late type diff?

5th September 2008, 11:05 AM	#3 (permalink)
R32 Combat New Users Join Date: Jan 2004 Location: Berkshire Posts: 4,332	Bugger, I don't know, The Diff is from a R32 GTR. Does that help? I have one to compare. Whats the difference?

5th September 2008, 12:27 PM	#4 (permalink)
Abbey M/S GTR Register Member Join Date: Feb 2002 Location: The workshop... Posts: 1,915	measure the approx spline O/D and the O/D of the part of the shaft that goes in the bearing.

5th September 2008, 05:32 PM	#5 (permalink)
R32 Combat New Users Join Date: Jan 2004 Location: Berkshire Posts: 4,332	The spline O/D reads 30.92mm and the bearing dia is 31.92mm Thanks Andy

5th September 2008, 07:33 PM	#7 (permalink)
R32 Combat New Users Join Date: Jan 2004 Location: Berkshire Posts: 4,332	I'm really only after this 1, but how much for a pair? Bearing in mind the diff and flanges I have I got for free!!!

5th September 2008, 07:55 PM	#9 (permalink)
R32 Combat New Users Join Date: Jan 2004 Location: Berkshire Posts: 4,332	Are they the same sizes as the one I have? Sizes are a few posts above^^