FREE HKS & TRUST Meters, Sensors, Harnesses

[RHDJapan]

Hello, as many of you know RHDJapan started with selling used items and we did this for many years. During this time we have accumulated dozens of different items which are too good to just throw away.

As we understand the difficulties abroad with locating repair/replacement parts for different meters/gauges. We would like to open up our boxes and boxes of different meters and meter parts to our customers.

Included is a wide assortment of mostly HKS and TRUST meters, sensors and harnesses.

If you are in need of a part or two in order to fix your setup please reply in this thread with the title representing the Series of the Meter in addition to a picture of the exact item desired.
We will then go through the items and if we can provide it we will put it on hold until your next order is placed.
*None of these items are guaranteed to work however most items are from perfectly working setups. Please understand this as the price is right.

[tarmac terror]

Hi Guys, desparate for Defi BF water temp and oil temp/pressure sensors if you have any...


TT

[jabran200]

need EGT,A/F, and boost gauge and and neccassary fittings. I'd prefer if they are 60mm but 51mm will be fine as well. I don't care about make or anything really just need some to replace my fried ones (never put fuses in line ). I need to order some bits soon so if you have these it would be great.

[nozza1]

have a friend who is interested in some bf defi oil & boost pressure gauges and egt sensor gauge with the control unit to govern them.

[tuRBy]

parts needed for:

PIVOT 88mm 10,000rpm gauge

white face,orange needle, 2 buttons on face [shift set+push set], polished outer-rim

PICS LINK
link to page = PIVOT Online Shopping
[select GEKKO on left hand side options]

PICS/MODEL
model = SGT-F0G [F-ZERO-G] or SGT-FOG [F-O-G]
GEKKO�@ƒ^ƒRƒ‰ƒ“ƒv�@SGT-F0G

The only difference is my model has the 2 buttons on the gauge face, where as this model has them on a seperate small electronic box.

---------------------

WANTED:
Do you have the shift-lamp [top-right of pic] and/or any of the wiring and/or sensors, i just have the gauge and holder.

[RHDJapan]

Thank you for the interest. We do not have any Defi Gauges or parts available. Luckily all of the sensors are still available from DEFI and we do sell these.
We are also not giving away the full sets of gauges that we do have. Everything will be parted for those who have meters that are in need of help to get back running properly.
Also, we do not have any Pivot related parts.

[RSVFOUR]

LOOKING FOR :~ fuel pressure sensor with wiring and complete water temp guage sender etc. for apexi el2 system (the one with the electronic sender unit ) . gauges would need to be 60mm white face ones . Might also be interested in any other pieces to fit this set up ( have boost / oil temp )
thanks

[RHDJapan]

Originally Posted by RSVFOUR

LOOKING FOR :~ fuel pressure sensor with wiring and complete water temp guage sender etc. for apexi el2 system (the one with the electronic sender unit ) . gauges would need to be 60mm white face ones . Might also be interested in any other pieces to fit this set up ( have boost / oil temp )
thanks

Sorry but we do not have any APEXi meter parts.

[kismetcapitan]

no Apexi I shoulda went with Stack when I spent a small fortune on my instruments

[RHDJapan]

Toby,
I was thinking about you. Can you confirm if your R32 is Zenki or not? if it is Zenki we have two full-scale meters. One from Tomei (~310km/h@82657km) and one from Nismo (~320km/h@61938km). If you are interested please let us know.

[GTR--J]

Looking for Greddy pressure sensor for my Greddy gauge.

[Madden]

Hello

I have been trying to track down some parts for ages now.

Apexi EL boost sensor wiring loom from sensor to controller
Apexi EL gauge controller as i keep smashing mine with my left knee.

[rockabilly]

hi guys, i need 6 bulbs for my 5 greddy 60mm gauges, the memory type. cheers bernie..pm me if needs be..

[RHDJapan]

Originally Posted by Madden

Hello

I have been trying to track down some parts for ages now.

Apexi EL boost sensor wiring loom from sensor to controller
Apexi EL gauge controller as i keep smashing mine with my left knee.

Sorry but we do not have any APEXi meters

[RHDJapan]

Originally Posted by rockabilly

hi guys, i need 6 bulbs for my 5 greddy 60mm gauges, the memory type. cheers bernie..pm me if needs be..

Is this for the series with the rubber fittings for bulb access, (non link type)? We only have one of these head units available. Since you need so many we can look around to see what is available.