R35 GTR Write up (written by 6 speed?) - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

turboslippers · 24th September 2008, 05:30 PM

Someone at work forwarded me this on...you'd expect it to be accurate being it's the magazine of the institute of engineering and technology!
I stopped reading when the explained that the engine is mounted behind the rear axle. Ok, that might be a typo but the photo of the R35 engine bay is comical. It's not even a standard engine bay....
Whoever wrote that clearly didn't put too much effort into the research!

Gez · 24th September 2008, 06:57 PM

Thats either an R33 or R34 engine bay.....

R33_GTS-t · 24th September 2008, 08:09 PM

Yeah, I got that issue with my membership. They had pretty much everything wrong. It weighs 2 tons apparently.

Scott · 24th September 2008, 08:39 PM

Quote:

Originally Posted by Gez

Thats either an R33 or R34 engine bay.....

Page fillers ay????

andreasgtr · 24th September 2008, 09:41 PM

There is even a typo in the headline, sying cuton- made... I'm sure that's a paper of quality.

makaveli7 · 24th September 2008, 09:47 PM

demise :O.. alive and kicking mate!

24th September 2008, 05:30 PM	#1 (permalink)
turboslippers GTROC Member Join Date: Nov 2003 Location: Essex Posts: 2,047	R35 GTR Write up (written by 6 speed?) Someone at work forwarded me this on...you'd expect it to be accurate being it's the magazine of the institute of engineering and technology! I stopped reading when the explained that the engine is mounted behind the rear axle. Ok, that might be a typo but the photo of the R35 engine bay is comical. It's not even a standard engine bay.... Whoever wrote that clearly didn't put too much effort into the research! __________________ regards Ben R32 GTR (very economical) Saab V6 convertible (75+ mpg on a run...) BMW 328i sport (runs on thin air)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

24th September 2008, 06:57 PM	#2 (permalink)
Gez GTR Register Member Join Date: Jan 2003 Location: London/Sydney Posts: 2,414	Thats either an R33 or R34 engine bay.....

24th September 2008, 08:09 PM	#3 (permalink)
R33_GTS-t GTR Register Member Join Date: Apr 2005 Location: [551] days from disposing of Labour. BNFL are shit. One repossession, one (bank) window. Posts: 8,119	Yeah, I got that issue with my membership. They had pretty much everything wrong. It weighs 2 tons apparently.

24th September 2008, 09:41 PM	#5 (permalink)
andreasgtr Noob Join Date: Jul 2003 Location: Germany Posts: 2,134	There is even a typo in the headline, sying cuton- made... I'm sure that's a paper of quality.

24th September 2008, 09:47 PM	#6 (permalink)
makaveli7 GTR Register Member Join Date: Oct 2007 Location: preston lancs Posts: 191	demise :O.. alive and kicking mate!