GTR33 General Engine Output Patterns. - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Tiger_kpt · 2nd October 2008, 09:48 AM

OK... just after a few basics on an R33 GTR engine.

What should the boost pattern be at WOT on a standard twin turbo engine running 0.9 bar boost?

What water temperature should the engine "settle" at under normal driving conditions when fully warmed up?

What should the oil pressures look like at cold and warm, at idle and WOT?

Car is running standard OEM water and oil pumps.

Cheers guys.
Kyle.

Mookistar · 2nd October 2008, 09:49 AM

on factory or aftermarket gauges?

Tiger_kpt · 2nd October 2008, 09:51 AM

Good point.

The Boost and Water Temp gauges are Greddy aftermarket ones.

The Oil Pressure is factory OEM.

2nd October 2008, 09:48 AM	#1 (permalink)
Tiger_kpt GTR Register Member Join Date: Oct 2008 Posts: 71	GTR33 General Engine Output Patterns. OK... just after a few basics on an R33 GTR engine. What should the boost pattern be at WOT on a standard twin turbo engine running 0.9 bar boost? What water temperature should the engine "settle" at under normal driving conditions when fully warmed up? What should the oil pressures look like at cold and warm, at idle and WOT? Car is running standard OEM water and oil pumps. Cheers guys. Kyle.

2nd October 2008, 09:49 AM	#2 (permalink)
Mookistar ADMINISTRATOR Join Date: Feb 2004 Location: Living life 8min 50 secs at a time Posts: 10,128	on factory or aftermarket gauges? __________________ WANTED - TEIN FLEX for R33 GTR FOR ALL GTR FORUM RELATED ISSUES CONTACT THE ADMIN TEAM 'MOOKISTAR' OR 'MOLEMAN' SKYLINE FAQ'S!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

2nd October 2008, 09:51 AM	#3 (permalink)
Tiger_kpt GTR Register Member Join Date: Oct 2008 Posts: 71	Good point. The Boost and Water Temp gauges are Greddy aftermarket ones. The Oil Pressure is factory OEM.