HKS Electronic Torque Split controller - ECU wiring harness diagram - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

chaz_r33_gtr · 1st February 2010, 07:30 PM

A guy was after making a wiring harness a while back so i took mine off my car and belled out all the wiring on it. I have triple checked it and am sure its right.

This harness is needed to go between the 4wd ECU socket and its associated wiring loom plug. Not sure how much use it will be as sourcing the male and female ECU connectors was a problem for the guy i sent this diagrame too.

Anyways here it is hope it helps someone

birdman.1 · 14th October 2010, 07:30 AM

Right on mate. Im sorry if this sounds a bit dumb but to my teck this will help him to wire it into the car correctly? I have a HKS unit and it has all the factory plugs and harnesses but i have no clue where to hook it all into. Thanks again

nick the tubman · 23rd January 2011, 05:42 PM

hi chaz,
do you have the set up for the boost control side ofthings mate? there are 3 flexi pipes in the engine bay and i have no idea what they connect to.
cheers
Nick

BNRr32_CL · 16th June 2012, 01:49 AM

chaz please sent me pics for the connectors the etc, i need install the etc and no have manual or instructions

1st February 2010, 07:30 PM	#1 (permalink)
chaz_r33_gtr chaz_r33_gtr is unleashing the 2.8 beast!!!! GTROC Member Join Date: Aug 2005 Location: Lancashire Cars owned: R33 GTR VSpec, (Yamaha R1 - yeah its abike ) Rover216 GTI Beast! Posts: 716	HKS Electronic Torque Split controller - ECU wiring harness diagram A guy was after making a wiring harness a while back so i took mine off my car and belled out all the wiring on it. I have triple checked it and am sure its right. This harness is needed to go between the 4wd ECU socket and its associated wiring loom plug. Not sure how much use it will be as sourcing the male and female ECU connectors was a problem for the guy i sent this diagrame too. Anyways here it is hope it helps someone __________________

14th October 2010, 07:30 AM	#2 (permalink)
birdman.1 birdman.1 is Bummed me motor is blown from a bad tune GTR Register Member Join Date: Aug 2010 Location: In the USA Posts: 130	Right on mate. Im sorry if this sounds a bit dumb but to my teck this will help him to wire it into the car correctly? I have a HKS unit and it has all the factory plugs and harnesses but i have no clue where to hook it all into. Thanks again __________________

23rd January 2011, 05:42 PM	#3 (permalink)
nick the tubman nick the tubman is trying to get his new car finished quickly GTROC Member Join Date: Jun 2006 Location: preston Cars owned: R35 GTR `10. R33 GTR v-spec Road & Track. R33 GTR Race Car Posts: 1,829	hi chaz, do you have the set up for the boost control side ofthings mate? there are 3 flexi pipes in the engine bay and i have no idea what they connect to. cheers Nick __________________ When it aint broke.... its amazing. www.civic-cup.co.uk

16th June 2012, 01:49 AM	#4 (permalink)
BNRr32_CL BNRr32_CL is unaware they can edit their status New Users Join Date: Jun 2012 Location: iquique, chile Posts: 4	chaz please sent me pics for the connectors the etc, i need install the etc and no have manual or instructions __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: