GREDDY SUCTION KIT - Installation Help - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

OBSESSION · 11th January 2012, 03:21 PM

Guys

Someone who has fitted the kit please help with the below.

When fitting the kit this pipe below gets replaced with a Silicone Piece supplied in the Kit, But where does the small pipe that was connected to it go now ?

Thanks!

OBSESSION · 12th January 2012, 08:00 AM

...... Please

fourtoes · 12th January 2012, 08:52 AM

The hose your looking at is here (number 14 at the bottom).
It leads back to the boost pressure solenoid.
Now for the life of me I cant remember what i did with mine before I fitted my Power FC and boost controller and ditched the stock pressure solenoid!

But hopefully this diagram will jog someone elses memory for you buddy!
HTH

bob

OBSESSION · 12th January 2012, 11:34 AM

Thanks Bob!

Lets see if anyone else can shed some light...

OBSESSION · 13th January 2012, 07:32 PM

Bob you are correct, I chatted to a Skyline Guru here today and he said you remove all that as you no longer need it because of your Boost Controller.

So it still leaves me wondering what someone does who has lets say a stock GTR and wants to fit the GREDDY Suction Kit...........................Straight Bolt on? I dont think so.....................

11th January 2012, 03:21 PM	#1 (permalink)
OBSESSION OBSESSION is Ahead GTROC Member Join Date: Aug 2010 Location: SA.........For Now Cars owned: GTR's Posts: 626	GREDDY SUCTION KIT - Installation Help Guys Someone who has fitted the kit please help with the below. When fitting the kit this pipe below gets replaced with a Silicone Piece supplied in the Kit, But where does the small pipe that was connected to it go now ? Thanks! __________________

12th January 2012, 08:00 AM	#2 (permalink)
OBSESSION OBSESSION is Ahead GTROC Member Join Date: Aug 2010 Location: SA.........For Now Cars owned: GTR's Posts: 626	...... Please __________________

12th January 2012, 08:52 AM	#3 (permalink)
fourtoes fourtoes is milk monitor Executive GTR Owners Club Member Join Date: Feb 2003 Location: Wiltshire Cars owned: R32 GTR Posts: 5,102	The hose your looking at is here (number 14 at the bottom). It leads back to the boost pressure solenoid. Now for the life of me I cant remember what i did with mine before I fitted my Power FC and boost controller and ditched the stock pressure solenoid! But hopefully this diagram will jog someone elses memory for you buddy! HTH bob __________________ Blue 30 TWO............................GTR :) To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Like us on Facebook ZEALOU5 turning cars into heroes. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ZEALOU5 Contact: Bobby Proctor Mobile: 07970699470 Website: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Email: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

12th January 2012, 11:34 AM	#4 (permalink)
OBSESSION OBSESSION is Ahead GTROC Member Join Date: Aug 2010 Location: SA.........For Now Cars owned: GTR's Posts: 626	Thanks Bob! Lets see if anyone else can shed some light... __________________

13th January 2012, 07:32 PM	#5 (permalink)
OBSESSION OBSESSION is Ahead GTROC Member Join Date: Aug 2010 Location: SA.........For Now Cars owned: GTR's Posts: 626	Bob you are correct, I chatted to a Skyline Guru here today and he said you remove all that as you no longer need it because of your Boost Controller. So it still leaves me wondering what someone does who has lets say a stock GTR and wants to fit the GREDDY Suction Kit...........................Straight Bolt on? I dont think so..................... __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: