Stagea RS4 auto gearbox selector photos needed. - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Chris Wilson · 17th April 2012, 06:48 PM

The wife has once again put her Stagea RS4 automatic in Park before it came to a complete standstill and jammed the park pawl in. Normally a bit of rocking of the car, to and fro, releases it, but this time she decided brute force on the selector lever was the answer and something under the car, in the linkage, has bent. I can see the cable is moving inside the car, above the tunnel, but underneath? Who knows? One can feel the friction of something moving, but not freely. the lever will select all gear positions, but the parking pawl remains resolutely in place... I would like a screen shot of the linkage assembly so I know what I am letting myself in for tomorrow, as I can't get it into the workshop, and it will have to be done outside, on my back. I had to tow it up the drive with the back end on a trolley jack. luckily this occurred at the gate, and not out in the sticks which is her route back from work. BLOODY women....

My FAST set up is not on my current PC, and I am not 100% sure it even had the RS4 Stage on it anyway. Can anyone help please? Thanks.

Chris Wilson · 18th April 2012, 02:20 PM

Sorted now, thanks.

17th April 2012, 06:48 PM	#1 (permalink)
Chris Wilson Chris Wilson is unaware they can edit their status GTR Register User Join Date: Aug 2001 Location: Shropshire Cars owned: R33 GTS-t with RB26 engine and Tractive dog box. And too many race cars according to `er indoors... Posts: 3,116	Stagea RS4 auto gearbox selector photos needed. The wife has once again put her Stagea RS4 automatic in Park before it came to a complete standstill and jammed the park pawl in. Normally a bit of rocking of the car, to and fro, releases it, but this time she decided brute force on the selector lever was the answer and something under the car, in the linkage, has bent. I can see the cable is moving inside the car, above the tunnel, but underneath? Who knows? One can feel the friction of something moving, but not freely. the lever will select all gear positions, but the parking pawl remains resolutely in place... I would like a screen shot of the linkage assembly so I know what I am letting myself in for tomorrow, as I can't get it into the workshop, and it will have to be done outside, on my back. I had to tow it up the drive with the back end on a trolley jack. luckily this occurred at the gate, and not out in the sticks which is her route back from work. BLOODY women.... My FAST set up is not on my current PC, and I am not 100% sure it even had the RS4 Stage on it anyway. Can anyone help please? Thanks. __________________

18th April 2012, 02:20 PM	#2 (permalink)
Chris Wilson Chris Wilson is unaware they can edit their status GTR Register User Join Date: Aug 2001 Location: Shropshire Cars owned: R33 GTS-t with RB26 engine and Tractive dog box. And too many race cars according to `er indoors... Posts: 3,116	Sorted now, thanks. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: