R33/R34 GTR Brembo F50 caliper conversion: - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Vihis · 24th April 2012, 09:37 PM

Hello,

I've got a set of F50 Brembo calipers laying about and would really love a set of brackets to fit a R33 GTR (Stagea in this case, same front hub etc). . Perhaps with disks.

Having searched the net to no avail, would anyone possibly have a company in mind who makes a conversion set up ? (There was a bookmark earlier, it's gone now on the other pc

).

Thank you ever so much for help. And apologies if there's already been a thread about this subject.

-Ville

R32 Combat · 24th April 2012, 09:38 PM

Can you not make the brackets your self?

fourtoes · 24th April 2012, 09:43 PM

BG Developments have the drawings for these, check out Fils post on the thread about fitting N1 rear R34 discs to other GTR's.
They made some lovely brackets for Fils F50 calipers.

Bob

Vihis · 24th April 2012, 09:49 PM

Quote:

Originally Posted by R32 Combat

Can you not make the brackets your self?

It's easier to dish out some cash than tinker with some sheet metal and a drill (or balsa -> machinist) due to being lazy and busy with other things. Hence a bolt on set would be greato. Oh, and they are Radial mount so a PITA to make yourself

Forgot to mention that..

Quote:

Originally Posted by fourtoes

BG Developments have the drawings for these, check out Fils post on the thread about fitting N1 rear R34 discs to other GTR's.
They made some lovely brackets for Fils F50 calipers.

Bob

Oh Hi there sir ! :]. I'll look into BG and Fils thread.

Thanksee !

fourtoes · 24th April 2012, 10:00 PM

Shout if you can't find it mate, I have Fils number!

Bob

fourtoes · 24th April 2012, 10:03 PM

Saved you the trouble!

R34 gtr N1 rear brake caliper brackets

Bob

Vihis · 24th April 2012, 10:19 PM

Thanks !

Email sent to BG. Hopefully we'll get somewhere with this. Watch out for a project thread, you project thread king ! ^^

lightspeed · 25th April 2012, 08:02 AM

Here's some inspiration

Vihis · 25th April 2012, 05:13 PM

AHEM. Nice. Thank you for sharing this

What size is that disk may I ask ? I contacted BG and they said I would have to provide them with a lot of different things and being in another country and not getting it right the first time.. (It seemed they didn't have a ready made pattern available).

lightspeed · 25th April 2012, 06:39 PM

Disc is 355x32 Brembo as used on ferrari 360 challenge race cars.

Brackets are RDD.

Niklas · 26th April 2012, 07:41 AM

How long are the hoses used?
About to order custom hoses for mine and its always good to double check the lenght.

Vihis · 6th May 2012, 09:27 AM

Still looking.

There was this Irish? brake company who had ready made sets with the F50 >_<). Argh.

Vihis · 14th September 2012, 06:54 PM

No luck.

Anyone ? :O

markM3 · 15th September 2012, 03:04 PM

Godspeed possibly?

dragerboy · 15th September 2012, 03:45 PM

Ive got F50s on my GTST. I may have the paperwork that has the original brembo part number for the mounting bracket.

24th April 2012, 09:37 PM	#1 (permalink)
Vihis Vihis is a BNR32 owner. Executive GTR Owners Club Member Join Date: Jan 2008 Location: Finland Posts: 799	R33/R34 GTR Brembo F50 caliper conversion: Hello, I've got a set of F50 Brembo calipers laying about and would really love a set of brackets to fit a R33 GTR (Stagea in this case, same front hub etc). . Perhaps with disks. Having searched the net to no avail, would anyone possibly have a company in mind who makes a conversion set up ? (There was a bookmark earlier, it's gone now on the other pc ). Thank you ever so much for help. And apologies if there's already been a thread about this subject. -Ville __________________

24th April 2012, 09:38 PM	#2 (permalink)
R32 Combat R32 Combat is in limbo Spannering again. Join Date: Jan 2004 Location: Berkshire Cars owned: R33 GTR Posts: 7,585	Can you not make the brackets your self? __________________ SKYLAB FUSION. The 3rd generation torque split controller for the ultimate driving experience. This replaces your old G-Sensor for a digital, faster responding, unit along with offering the driver the ability to alter the balance of the cars 4WD power delivery for the optimum balance. A free fitting service is available at Skylab HQ, which is postcode RG19 Only £229. plus £10 p&p worldwide tracked postage Also available in the GTROC online shop To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

24th April 2012, 09:43 PM	#3 (permalink)
fourtoes fourtoes is milk monitor Executive GTR Owners Club Member Join Date: Feb 2003 Location: Wiltshire Cars owned: R32 GTR Posts: 5,102	BG Developments have the drawings for these, check out Fils post on the thread about fitting N1 rear R34 discs to other GTR's. They made some lovely brackets for Fils F50 calipers. Bob __________________ Blue 30 TWO............................GTR :) To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Like us on Facebook ZEALOU5 turning cars into heroes. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ZEALOU5 Contact: Bobby Proctor Mobile: 07970699470 Website: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Email: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

24th April 2012, 10:00 PM	#5 (permalink)
fourtoes fourtoes is milk monitor Executive GTR Owners Club Member Join Date: Feb 2003 Location: Wiltshire Cars owned: R32 GTR Posts: 5,102	Shout if you can't find it mate, I have Fils number! Bob __________________ Blue 30 TWO............................GTR :) To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Like us on Facebook ZEALOU5 turning cars into heroes. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ZEALOU5 Contact: Bobby Proctor Mobile: 07970699470 Website: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Email: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

24th April 2012, 10:03 PM	#6 (permalink)
fourtoes fourtoes is milk monitor Executive GTR Owners Club Member Join Date: Feb 2003 Location: Wiltshire Cars owned: R32 GTR Posts: 5,102	Saved you the trouble! R34 gtr N1 rear brake caliper brackets Bob __________________ Blue 30 TWO............................GTR :) To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Like us on Facebook ZEALOU5 turning cars into heroes. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ZEALOU5 Contact: Bobby Proctor Mobile: 07970699470 Website: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Email: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

24th April 2012, 10:19 PM	#7 (permalink)
Vihis Vihis is a BNR32 owner. Executive GTR Owners Club Member Join Date: Jan 2008 Location: Finland Posts: 799	Thanks ! Email sent to BG. Hopefully we'll get somewhere with this. Watch out for a project thread, you project thread king ! ^^ __________________

25th April 2012, 08:02 AM	#8 (permalink)
lightspeed lightspeed is building an HKS Step 3 2.8 :) GTROC Member Join Date: Jul 2002 Location: South-west Cars owned: Project BNR32 Posts: 2,760	Here's some inspiration __________________

25th April 2012, 05:13 PM	#9 (permalink)
Vihis Vihis is a BNR32 owner. Executive GTR Owners Club Member Join Date: Jan 2008 Location: Finland Posts: 799	AHEM. Nice. Thank you for sharing this What size is that disk may I ask ? I contacted BG and they said I would have to provide them with a lot of different things and being in another country and not getting it right the first time.. (It seemed they didn't have a ready made pattern available). __________________

25th April 2012, 06:39 PM	#10 (permalink)
lightspeed lightspeed is building an HKS Step 3 2.8 :) GTROC Member Join Date: Jul 2002 Location: South-west Cars owned: Project BNR32 Posts: 2,760	Disc is 355x32 Brembo as used on ferrari 360 challenge race cars. Brackets are RDD. __________________

26th April 2012, 07:41 AM	#11 (permalink)
Niklas Niklas is almost done with the R32 (for now) GTR Register User Join Date: Feb 2006 Location: Sweden Posts: 391	How long are the hoses used? About to order custom hoses for mine and its always good to double check the lenght. __________________

6th May 2012, 09:27 AM	#12 (permalink)
Vihis Vihis is a BNR32 owner. Executive GTR Owners Club Member Join Date: Jan 2008 Location: Finland Posts: 799	Still looking. There was this Irish? brake company who had ready made sets with the F50 >_<). Argh. __________________

14th September 2012, 06:54 PM	#13 (permalink)
Vihis Vihis is a BNR32 owner. Executive GTR Owners Club Member Join Date: Jan 2008 Location: Finland Posts: 799	No luck. Anyone ? :O __________________

15th September 2012, 03:04 PM	#14 (permalink)
markM3 markM3 is unaware they can edit their status Executive GTR Owners Club Member Join Date: Jan 2008 Posts: 1,362	Godspeed possibly? __________________

15th September 2012, 03:45 PM	#15 (permalink)
dragerboy dragerboy is enjoying American Dad GTR Register User Join Date: May 2003 Location: Horsham, West Sussex Cars owned: 200sx S14 Posts: 235	Ive got F50s on my GTST. I may have the paperwork that has the original brembo part number for the mounting bracket. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: