HKS management systems - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Abbey M/S · 10th January 2005, 04:48 PM

HKS SZ management system

supplied and map including fitting a Map sensor so no need to up grade you
air flow meters for over 450 bhp

£1300 inc vat ( includes mapping the car)

No cam swinging thou, this will be charged at the normal dyno rate.

extra work will be charged at £100 + vat an hour while the car is on the
dyno or £60 + vat an hour in the workshop.

Luffy · 10th January 2005, 04:50 PM

And another great price, you guys are making the decision ofchoosing a ECU hard!

Luffy · 10th January 2005, 04:53 PM

what extra work might be needed?

Abbey M/S · 10th January 2005, 04:55 PM

Curing mis-fires setting up boost controllers,setting up fuel pressure etc etc

Luffy · 10th January 2005, 04:57 PM

fair enough, if mine is a new setup i.e. new turbo fuel system, etc then it is likely that boost controller and fuel pressure would be needed to setup, correct?

10th January 2005, 04:48 PM	#1 (permalink)
Abbey M/S GTR Register Member Join Date: Feb 2002 Location: The workshop... Posts: 1,922	HKS management systems HKS SZ management system supplied and map including fitting a Map sensor so no need to up grade you air flow meters for over 450 bhp £1300 inc vat ( includes mapping the car) No cam swinging thou, this will be charged at the normal dyno rate. extra work will be charged at £100 + vat an hour while the car is on the dyno or £60 + vat an hour in the workshop. Last edited by Abbey M/S; 10th January 2005 at 04:54 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10th January 2005, 04:50 PM	#2 (permalink)
Luffy GTR Register Member Join Date: Jul 2004 Location: Gloucester Posts: 1,531	And another great price, you guys are making the decision ofchoosing a ECU hard!

10th January 2005, 04:53 PM	#3 (permalink)
Luffy GTR Register Member Join Date: Jul 2004 Location: Gloucester Posts: 1,531	what extra work might be needed?

10th January 2005, 04:55 PM	#4 (permalink)
Abbey M/S GTR Register Member Join Date: Feb 2002 Location: The workshop... Posts: 1,922	Curing mis-fires setting up boost controllers,setting up fuel pressure etc etc

10th January 2005, 04:57 PM	#5 (permalink)
Luffy GTR Register Member Join Date: Jul 2004 Location: Gloucester Posts: 1,531	fair enough, if mine is a new setup i.e. new turbo fuel system, etc then it is likely that boost controller and fuel pressure would be needed to setup, correct?