Anyone recognise these??? - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

GibraltarR33GTR · 28th September 2005, 09:18 AM

I have 2 tubbys which I bought over from Japan.

They are Garret's and have the following markings:-

AR 60 M 24

From what I have here they seem to flow around 320bhp each.

any of you have any idea on exactly/roughly what they are?

any help is as always deeply appreciatted

Ivan

gtr mart · 28th September 2005, 11:34 AM

not sure about the turbos. The AR ratio is the give away - might be worth looking at other turbos like the hks 2530's to see what their AR is.

GibraltarR33GTR · 28th September 2005, 11:42 AM

thanks for that m8.

google doesnt seem to be throwing up much useful info though :/

Nismoalex · 28th September 2005, 12:14 PM

They sound like N1's to me ...... Do a search for an old thread that had all the markings listed ... but pretty sure.

Pikey · 28th September 2005, 12:50 PM

Sounds like N1s to me too

NISFAN · 28th September 2005, 04:21 PM

Quote:

Originally Posted by GibraltarR33GTR

I have 2 tubbys which I bought over from Japan.

They are Garret's and have the following markings:-

AR 60 M 24

From what I have here they seem to flow around 320bhp each.

any of you have any idea on exactly/roughly what they are?

any help is as always deeply appreciatted

Ivan

Don't they have a plate on them with part numbers? List these and someone will identify them. AR60 M24 Garrett could be lots of Turbo models.

GibraltarR33GTR · 28th September 2005, 05:21 PM

yar

am gona have a look at them a little later and post see what I come up with.

cheers lads

GibraltarR33GTR · 29th September 2005, 04:26 PM

OK lads heres more info for ya :-

ZE 0105J

14411-RS580

466089-5A

430819-212

thats about everything I could get of them..

any ideas?

Abbey M/S · 29th September 2005, 05:10 PM

look on the exhaust housings for a A/R size STD turbo,s have 0.48 N1,s have 0.64 from memory.

Mark

GibraltarR33GTR · 29th September 2005, 05:36 PM

ok found em

Nismo For Street (14411-RS580)

Compressor Wheel = T04B
Compressor A/R = 0.42
Compressor Housing = T3
Compressor Trim = 62T
Bearings = 360°
Turbine Wheel = T25
Turbine A/R = 0.64
Turbine Housing = T25
Turbine Trim = CD79
Cut Back = 7°
Approx 300PS

next question is has anyone here used them? and are they any good?

Nocturnal · 30th September 2005, 12:04 PM

according to my HyperRev for R32, there are 2 car on there using the RS580 Turbo. One is doing 480 bhp, the other is doing 600 bhp. From what I gather, they are good. I can't read japanese.

28th September 2005, 09:18 AM	#1 (permalink)
GibraltarR33GTR GTR Register Member Join Date: Apr 2004 Location: Gibraltar Posts: 196	Anyone recognise these??? I have 2 tubbys which I bought over from Japan. They are Garret's and have the following markings:- AR 60 M 24 From what I have here they seem to flow around 320bhp each. any of you have any idea on exactly/roughly what they are? any help is as always deeply appreciatted Ivan

28th September 2005, 11:42 AM	#3 (permalink)
GibraltarR33GTR GTR Register Member Join Date: Apr 2004 Location: Gibraltar Posts: 196	thanks for that m8. google doesnt seem to be throwing up much useful info though :/ Last edited by GibraltarR33GTR; 28th September 2005 at 11:50 AM.

30th September 2005, 12:04 PM	#11 (permalink)
Nocturnal GTROC Member Join Date: Nov 2004 Location: Banzai Oct.07 Issue Posts: 1,789	according to my HyperRev for R32, there are 2 car on there using the RS580 Turbo. One is doing 480 bhp, the other is doing 600 bhp. From what I gather, they are good. I can't read japanese. __________________ WideBody BNR32: Winner of the 2007 Cubism Award!!! Banzai October 2007 Feature Car / MaxPower April 2008 Feature Car For Magazine Feature, Wallpapers, Videos, and more...CLICK HERE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

28th September 2005, 11:34 AM	#2 (permalink)
gtr mart GTR Register Member Join Date: Mar 2004 Posts: 1,637	not sure about the turbos. The AR ratio is the give away - might be worth looking at other turbos like the hks 2530's to see what their AR is.

28th September 2005, 12:14 PM	#4 (permalink)
Nismoalex GTR Register Member Join Date: Sep 2003 Posts: 952	They sound like N1's to me ...... Do a search for an old thread that had all the markings listed ... but pretty sure.

28th September 2005, 12:50 PM	#5 (permalink)
Pikey GTR Register Member Join Date: Feb 2004 Location: Cheltenham Posts: 4,151	Sounds like N1s to me too

28th September 2005, 05:21 PM	#7 (permalink)
GibraltarR33GTR GTR Register Member Join Date: Apr 2004 Location: Gibraltar Posts: 196	yar am gona have a look at them a little later and post see what I come up with. cheers lads

29th September 2005, 04:26 PM	#8 (permalink)
GibraltarR33GTR GTR Register Member Join Date: Apr 2004 Location: Gibraltar Posts: 196	OK lads heres more info for ya :- ZE 0105J 14411-RS580 466089-5A 430819-212 thats about everything I could get of them.. any ideas?

29th September 2005, 05:10 PM	#9 (permalink)
Abbey M/S GTR Register Member Join Date: Feb 2002 Location: The workshop... Posts: 1,964	look on the exhaust housings for a A/R size STD turbo,s have 0.48 N1,s have 0.64 from memory. Mark

29th September 2005, 05:36 PM	#10 (permalink)
GibraltarR33GTR GTR Register Member Join Date: Apr 2004 Location: Gibraltar Posts: 196	ok found em Nismo For Street (14411-RS580) Compressor Wheel = T04B Compressor A/R = 0.42 Compressor Housing = T3 Compressor Trim = 62T Bearings = 360° Turbine Wheel = T25 Turbine A/R = 0.64 Turbine Housing = T25 Turbine Trim = CD79 Cut Back = 7° Approx 300PS next question is has anyone here used them? and are they any good?