RB25DET Greddy inlet manifold, HELP - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

andy42uk · 20th October 2005, 09:48 PM

Due to GTR FMIC, and for the sake of rational pipping I want one of these.
I spent a long time last night reading all the OZ forums, about flow rates etc. but all I want to know is will it be ok, i.e. similar to the stock one?
Anyone got good ideas or personal experience?
My cars performance is good, yes I will want better, (and the engine is now built for more), but this is my only car, my daily driver, so I need good pick-up.
Thoughts please...
Regards,
Andy.

mambastu · 20th October 2005, 10:10 PM

Yeah, its fine. I use one on mine (albeit in a 200SX) with a R34 GTR intercooler. Throttle response is fine and low end response and torque are good.

20th October 2005, 09:48 PM	#1 (permalink)
andy42uk GTR Register Member Join Date: Sep 2005 Location: Oxford Posts: 874	RB25DET Greddy inlet manifold, HELP Due to GTR FMIC, and for the sake of rational pipping I want one of these. I spent a long time last night reading all the OZ forums, about flow rates etc. but all I want to know is will it be ok, i.e. similar to the stock one? Anyone got good ideas or personal experience? My cars performance is good, yes I will want better, (and the engine is now built for more), but this is my only car, my daily driver, so I need good pick-up. Thoughts please... Regards, Andy.

20th October 2005, 10:10 PM	#2 (permalink)
mambastu GTROC Member Join Date: Feb 2002 Location: West Sussex Posts: 626	Yeah, its fine. I use one on mine (albeit in a 200SX) with a R34 GTR intercooler. Throttle response is fine and low end response and torque are good. __________________ Cheers Stu R32 GTR - Godzirra Twin turbo RB25'd 200SX RS13 - 405bhp and 348lbs ft on 15psi

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: