ATS Clutch - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

hacmeister · 22nd October 2005, 04:52 PM

Hello all,

i picked up a second hand ats carbon twin plate for my r33 gtr and have found that the inner plate was worn to 3.16mm (on edge of tolerance i belive) and the metal centre plate has warped, probably from it getting very hot i would think.

I have had a refresh kit price from a uk supplier but at over £800 + VAT it seems a little on the expensive side......

Anyone out there know if this price is about right or should i shop about a bit ?

Thanks Andy

lightspeed · 22nd October 2005, 05:14 PM

Have you checked the ATS japan website yet?

22nd October 2005, 04:52 PM	#1 (permalink)
hacmeister GTR Register Member Join Date: Mar 2005 Location: Herts Posts: 23	ATS Clutch Hello all, i picked up a second hand ats carbon twin plate for my r33 gtr and have found that the inner plate was worn to 3.16mm (on edge of tolerance i belive) and the metal centre plate has warped, probably from it getting very hot i would think. I have had a refresh kit price from a uk supplier but at over £800 + VAT it seems a little on the expensive side...... Anyone out there know if this price is about right or should i shop about a bit ? Thanks Andy

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

22nd October 2005, 05:14 PM	#2 (permalink)
lightspeed GTROC Member Join Date: Jul 2002 Location: South-west Posts: 1,812	Have you checked the ATS japan website yet?