Can I run 1.2bar? - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Alex j B · 24th October 2005, 10:21 PM

I've been thinking about fitting a Blitz boost controller I've got in the stores, but I've got a Blitz ecu that runs 1 bar, so could I safely run 1.2bar, the mods I've got dome are, downpipes, decat, air filter, steel internals in standard turbos and the ecu, the car is running quite rich according to Abbeys dyno, so would 1.2 bar be safe without any fuelling mods?

Cheers
Alex B

paul cawson · 24th October 2005, 10:37 PM

The MAFs and Injectors will be Ok for 1.2 bar, but back to the dyno to make sure your ECU and plugs are up to it. Once its set up a R32 GTR @ 1.2 bar with standard/steel turbos is a great track car.

24th October 2005, 10:21 PM	#1 (permalink)
Alex j B GTR Register Member Join Date: Apr 2004 Location: Bristol Posts: 1,816	Can I run 1.2bar? I've been thinking about fitting a Blitz boost controller I've got in the stores, but I've got a Blitz ecu that runs 1 bar, so could I safely run 1.2bar, the mods I've got dome are, downpipes, decat, air filter, steel internals in standard turbos and the ecu, the car is running quite rich according to Abbeys dyno, so would 1.2 bar be safe without any fuelling mods? Cheers Alex B

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

24th October 2005, 10:37 PM	#2 (permalink)
paul cawson New Users Join Date: Jul 2003 Location: Essex Posts: 2,098	The MAFs and Injectors will be Ok for 1.2 bar, but back to the dyno to make sure your ECU and plugs are up to it. Once its set up a R32 GTR @ 1.2 bar with standard/steel turbos is a great track car.