r32gtr 400bhp+ - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

edmy · 28th October 2005, 11:59 AM

gauging interest in my 1989g reg r32gtr
it has over 15000pounds worth of receipts from abbey and rk
the car has
rebuilt steel internal turbos
hks cams 272 in/out
twin plate nismo clutch
1.2 bar abbey chip
greddy hard pipe kit
18 inch ultralites
super drager exhaust
trust downpipes
lots more
looking for around 9000 very good condtion espcially as its 16years old
will send pics and more spec if anyone interested

edmy · 28th October 2005, 02:37 PM

looking for a quick sale so up for sensible offers

Nismoalex · 28th October 2005, 02:51 PM

you have PM

edmy · 29th October 2005, 05:21 PM

sorry for not replying no computer at the mo using everyone elses, will try and post pics asap, just thought id say went to rolling road today torque was 487ftlb!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!

SkylineNewbie · 29th October 2005, 06:28 PM

What was BHP mate?

edmy · 30th October 2005, 06:23 PM

probaly shot myself in the foot there bhp was only 320?? the guy on the rollers said it was because of the standad ecu? that was also at 1.1bar
this is a site were u can see it http://www.zoom4cars.co.uk/details.asp?cdID=346700

SkylineNewbie · 30th October 2005, 10:59 PM

2.7 on standard ECU??????!!!!!!

edmy · 31st October 2005, 07:10 AM

modified standard ecu by abbey, its run fine for me and the last owner but it would benefit from a upgraded one but i dont want to put the money in it

edmy · 2nd November 2005, 09:12 AM

edmy · 2nd November 2005, 04:35 PM

edmy · 2nd November 2005, 04:36 PM

sum one must b interested in the beast

edmy · 2nd November 2005, 07:00 PM

wat price is it worth for a quick sale?? any offers!!?

edmy · 4th November 2005, 02:54 PM

NEW PRICE 8500ovno needs to be sold arrival of new car soon!!

SkylineNewbie · 4th November 2005, 04:37 PM

where are you located mate?

edmy · 4th November 2005, 05:31 PM

blackburn in the north west

28th October 2005, 11:59 AM	#1 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	r32gtr 400bhp+ gauging interest in my 1989g reg r32gtr it has over 15000pounds worth of receipts from abbey and rk the car has rebuilt steel internal turbos hks cams 272 in/out twin plate nismo clutch 1.2 bar abbey chip greddy hard pipe kit 18 inch ultralites super drager exhaust trust downpipes lots more looking for around 9000 very good condtion espcially as its 16years old will send pics and more spec if anyone interested

2nd November 2005, 09:12 AM	#9 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	bttt

2nd November 2005, 04:35 PM	#10 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	bttt

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

28th October 2005, 02:37 PM	#2 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	looking for a quick sale so up for sensible offers

28th October 2005, 02:51 PM	#3 (permalink)
Nismoalex GTR Register Member Join Date: Sep 2003 Posts: 952	you have PM

29th October 2005, 05:21 PM	#4 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	sorry for not replying no computer at the mo using everyone elses, will try and post pics asap, just thought id say went to rolling road today torque was 487ftlb!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!

29th October 2005, 06:28 PM	#5 (permalink)
SkylineNewbie GTR Register Member Join Date: Mar 2002 Location: UK Posts: 346	What was BHP mate?

30th October 2005, 06:23 PM	#6 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	probaly shot myself in the foot there bhp was only 320?? the guy on the rollers said it was because of the standad ecu? that was also at 1.1bar this is a site were u can see it http://www.zoom4cars.co.uk/details.asp?cdID=346700

30th October 2005, 10:59 PM	#7 (permalink)
SkylineNewbie GTR Register Member Join Date: Mar 2002 Location: UK Posts: 346	2.7 on standard ECU??????!!!!!!

31st October 2005, 07:10 AM	#8 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	modified standard ecu by abbey, its run fine for me and the last owner but it would benefit from a upgraded one but i dont want to put the money in it

2nd November 2005, 04:36 PM	#11 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	sum one must b interested in the beast

2nd November 2005, 07:00 PM	#12 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	wat price is it worth for a quick sale?? any offers!!?

4th November 2005, 02:54 PM	#13 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	NEW PRICE 8500ovno needs to be sold arrival of new car soon!!

4th November 2005, 04:37 PM	#14 (permalink)
SkylineNewbie GTR Register Member Join Date: Mar 2002 Location: UK Posts: 346	where are you located mate?

4th November 2005, 05:31 PM	#15 (permalink)
edmy GTR Register Member Join Date: Apr 2005 Posts: 525	blackburn in the north west