GTR tuning parts - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

chovden · 7th November 2005, 06:24 PM

I have a Apexi RX6 Turbo kitt for sale it had been very little used and are in very good condition.
The kitt has: topp mount manifolds, 2xrx6 turbos, wastegate, downpipes heat shields and oil lines+ some other parts that I probbably don`t remember..
It has been on a R32GTR but will probbably fit r33 and r34 without to much work

Offers

I allsow have 2 setts off Tomei cam pullys

Offers

And 1 brand new clear cam cover

Offers

And 1 Garrett GT3540R turbo brand new

Offers

PM me with offers for the parts.

Christian

TURBOKONGEN · 8th November 2005, 06:33 PM

these parts are in VERY good condition .
They have not been used very many miles .
The turbos are good as new with no shaft play .

neeltec · 8th November 2005, 08:51 PM

Whats the spec on the Apexi tubbies?

TURBOKONGEN · 10th November 2005, 07:32 PM

They are rated at aprox. 450hp each .
I can measure the inlets /outlets on them later .
The turbine outlets are big....over 60mm from my memory last I looked at them . Try to take somepictures too later , if someone can post them .

7th November 2005, 06:24 PM	#1 (permalink)
chovden GTR Register Member Join Date: Oct 2003 Location: Norway Posts: 88	GTR tuning parts I have a Apexi RX6 Turbo kitt for sale it had been very little used and are in very good condition. The kitt has: topp mount manifolds, 2xrx6 turbos, wastegate, downpipes heat shields and oil lines+ some other parts that I probbably don`t remember.. It has been on a R32GTR but will probbably fit r33 and r34 without to much work Offers I allsow have 2 setts off Tomei cam pullys Offers And 1 brand new clear cam cover Offers And 1 Garrett GT3540R turbo brand new Offers PM me with offers for the parts. Christian

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

8th November 2005, 06:33 PM	#2 (permalink)
TURBOKONGEN GTR Register Member Join Date: Mar 2004 Posts: 250	these parts are in VERY good condition . They have not been used very many miles . The turbos are good as new with no shaft play .

8th November 2005, 08:51 PM	#3 (permalink)
neeltec GTR Register Member Join Date: Sep 2005 Location: Lancashire Posts: 660	Whats the spec on the Apexi tubbies?

10th November 2005, 07:32 PM	#4 (permalink)
TURBOKONGEN GTR Register Member Join Date: Mar 2004 Posts: 250	They are rated at aprox. 450hp each . I can measure the inlets /outlets on them later . The turbine outlets are big....over 60mm from my memory last I looked at them . Try to take somepictures too later , if someone can post them .