AP Brakes - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Colwell · 12th December 2005, 06:31 PM

Hi there, i've popped over from the SXOC forum as im in need of some help in sorting a brake issue.

I have 99 S14a with a set of 18" R34 GTR wheels and have been looking at the AP 356mm 6 pot brake conversion. The kit itself is for the skyline but can be made to fit the 200 tapping the hub mounting points.

My question is though, will the kit fit under the R34 GTR wheels withought any problems like the caliper rubbing on the inside of the spokes

Info from people who run this setup or know for sure would be appreciated.

Regards

James
SXOC

markyboy.1967 · 12th December 2005, 07:51 PM

Have a look in the members gallery and you will see the 355mm kit fitted which is a very similar calliper to the AP`s and im sure they are on an R34 with 18`s.

Cord · 14th December 2005, 08:12 PM

The AP 356mm kit will fit under stock 34 rims.

Smootster73 · 16th December 2005, 10:53 AM

er brake balance?

what is the 200 rear like? you will have all the weight of the engine and MORE braking over the front too.

back end will be as light as hell surely!

bigger rears as well??

12th December 2005, 06:31 PM	#1 (permalink)
Colwell GTR Register Member Join Date: Dec 2005 Posts: 21	AP Brakes Hi there, i've popped over from the SXOC forum as im in need of some help in sorting a brake issue. I have 99 S14a with a set of 18" R34 GTR wheels and have been looking at the AP 356mm 6 pot brake conversion. The kit itself is for the skyline but can be made to fit the 200 tapping the hub mounting points. My question is though, will the kit fit under the R34 GTR wheels withought any problems like the caliper rubbing on the inside of the spokes Info from people who run this setup or know for sure would be appreciated. Regards James SXOC

12th December 2005, 07:51 PM	#2 (permalink)
markyboy.1967 New Users Join Date: Feb 2004 Location: Scotland Posts: 1,839	Brakes Have a look in the members gallery and you will see the 355mm kit fitted which is a very similar calliper to the AP`s and im sure they are on an R34 with 18`s.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

14th December 2005, 08:12 PM	#3 (permalink)
Cord GTR Register Member Join Date: Aug 2002 Location: RB Motorsport Posts: 1,566	The AP 356mm kit will fit under stock 34 rims.

16th December 2005, 10:53 AM	#4 (permalink)
Smootster73 GTR Register Member Join Date: Oct 2001 Location: Still Waxing the Dolphin probably! Posts: 1,759	er brake balance? what is the 200 rear like? you will have all the weight of the engine and MORE braking over the front too. back end will be as light as hell surely! bigger rears as well??