Derestricting Imported GTR33 V-Spec - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Bladebird · 20th December 2005, 10:10 AM

Just got GTR33 V-Spec that's been restricted. Any clues how to de-restrict? Cuts in at c120mph. Cheers

vennuth · 20th December 2005, 11:54 AM

It should cut in at 112mph. Get a new ecu for it and have it mapped - no more restriction, no problems with UK fuel and at 1 bar boost, a good deal more power.

playasyougo · 20th December 2005, 03:44 PM

Contact these guys - www.kilburne.com/2410/frames.php

Very helpful people.

deggers · 30th December 2005, 09:57 AM

Or one of these

Or can you cut wire 53 on a GTR? You can on the GTS-T's. (Although you do say bye bye to HICAS)

deef · 30th December 2005, 10:55 AM

Me dont likes the sounds of cuttin the wire me does.. lol

In the long run mate better off buyin new Re- Mappable ECU, Im sure you will start to fine tune her to. LOL

NissanBoy · 30th December 2005, 10:13 PM

Don't cut any wires, just get the only true conversion, UK speedo and ECU. This will retain the hicas and you will have your speed in MPH on a proper UK dial and have the ECU de-restricted with either a standard ecu or a stage 1 ecu.

PM for details.

GTR RICH · 30th December 2005, 10:35 PM

This will do it http://cgi.ebay.co.uk/BRAND-NEW-JDM-...QQcmdZViewItem

jza80 · 2nd January 2006, 04:02 PM

The UK-version speedo will remove the speed limit by itself. You won't need to also remap. It also looks clean, and records distance in miles.

20th December 2005, 10:10 AM	#1 (permalink)
Bladebird GTR Register Member Join Date: Dec 2005 Location: West Sussex Posts: 20	Derestricting Imported GTR33 V-Spec Just got GTR33 V-Spec that's been restricted. Any clues how to de-restrict? Cuts in at c120mph. Cheers

30th December 2005, 10:55 AM	#5 (permalink)
deef New Users Join Date: Aug 2005 Location: Ireland Posts: 726	wire Me dont likes the sounds of cuttin the wire me does.. lol In the long run mate better off buyin new Re- Mappable ECU, Im sure you will start to fine tune her to. LOL

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

20th December 2005, 11:54 AM	#2 (permalink)
vennuth GTR Register Member Join Date: Aug 2001 Location: Coventry Posts: 2,216	It should cut in at 112mph. Get a new ecu for it and have it mapped - no more restriction, no problems with UK fuel and at 1 bar boost, a good deal more power.

20th December 2005, 03:44 PM	#3 (permalink)
playasyougo GTR Register Member Join Date: Nov 2003 Location: Edinburgh Posts: 357	Contact these guys - www.kilburne.com/2410/frames.php Very helpful people.

30th December 2005, 09:57 AM	#4 (permalink)
deggers GTR Register Member Join Date: Jul 2005 Location: Leeds, West Yorkshire Posts: 150	Or one of these Or can you cut wire 53 on a GTR? You can on the GTS-T's. (Although you do say bye bye to HICAS)

30th December 2005, 10:13 PM	#6 (permalink)
NissanBoy GTR Register Member Join Date: Jul 2005 Location: NW London Posts: 179	Don't cut any wires, just get the only true conversion, UK speedo and ECU. This will retain the hicas and you will have your speed in MPH on a proper UK dial and have the ECU de-restricted with either a standard ecu or a stage 1 ecu. PM for details.

30th December 2005, 10:35 PM	#7 (permalink)
GTR RICH GTR Register Member Join Date: Oct 2005 Location: Medway Posts: 1,274	This will do it http://cgi.ebay.co.uk/BRAND-NEW-JDM-...QQcmdZViewItem

2nd January 2006, 04:02 PM	#8 (permalink)
jza80 GTR Register Member Join Date: Oct 2002 Location: So. Orange County, USA Posts: 280	The UK-version speedo will remove the speed limit by itself. You won't need to also remap. It also looks clean, and records distance in miles.