Whiteline Camber and castor kit fitting? - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

skyline69_uk · 29th December 2005, 02:32 PM

Can anyone give me advice on fitting the Whiteline camber and castor kits to an R32 GT-R - things like pitfalls and how to adjust the camber etc.

I presume from the offset drilled holes that this is how the camber is given the 0.75 degrees of extra adjustment? My camber is too much at 2.5 degrees and I need to reduce it - what way round do I need to fit these? The castor is similar with too much on the passenger side - any special fitting for these folks - any help would be great

.

skyline69_uk · 29th December 2005, 07:36 PM

stuartstaples · 30th December 2005, 10:47 AM

Had the work done recently and well worth the money. I cannot advise you on anything technically but you could give Job a call at Whiteline. He seems very helpful.

skyline69_uk · 30th December 2005, 06:11 PM

Thanks Stuart - do you have a number for him?

stuartstaples · 30th December 2005, 07:42 PM

ADDRESS:
Whiteline Automotive UK
Merlin House
5 Cross Way
Hillend Industrial Park
Fife. Scotland
KY11 9JE
PHONE:
01383 820820
int+44 1383 820820 (international)
FAX:
01383 820 111
EMAIL:
sales@whitelineautomotive.co.uk

29th December 2005, 02:32 PM	#1 (permalink)
skyline69_uk GTROC Member Join Date: Jan 2005 Location: NI Posts: 2,833	Whiteline Camber and castor kit fitting? Can anyone give me advice on fitting the Whiteline camber and castor kits to an R32 GT-R - things like pitfalls and how to adjust the camber etc. I presume from the offset drilled holes that this is how the camber is given the 0.75 degrees of extra adjustment? My camber is too much at 2.5 degrees and I need to reduce it - what way round do I need to fit these? The castor is similar with too much on the passenger side - any special fitting for these folks - any help would be great . __________________ Do it right or don't do it at all. "You're a pack of a**holes!" - Jim Richards 1992. スカイライン６９　UK

29th December 2005, 07:36 PM	#2 (permalink)
skyline69_uk GTROC Member Join Date: Jan 2005 Location: NI Posts: 2,833	bump __________________ Do it right or don't do it at all. "You're a pack of a**holes!" - Jim Richards 1992. スカイライン６９　UK

30th December 2005, 06:11 PM	#4 (permalink)
skyline69_uk GTROC Member Join Date: Jan 2005 Location: NI Posts: 2,833	Thanks Stuart - do you have a number for him? __________________ Do it right or don't do it at all. "You're a pack of a**holes!" - Jim Richards 1992. スカイライン６９　UK

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

30th December 2005, 10:47 AM	#3 (permalink)
stuartstaples New Users Join Date: Nov 2004 Posts: 1,252	Had the work done recently and well worth the money. I cannot advise you on anything technically but you could give Job a call at Whiteline. He seems very helpful.

30th December 2005, 07:42 PM	#5 (permalink)
stuartstaples New Users Join Date: Nov 2004 Posts: 1,252	ADDRESS: Whiteline Automotive UK Merlin House 5 Cross Way Hillend Industrial Park Fife. Scotland KY11 9JE PHONE: 01383 820820 int+44 1383 820820 (international) FAX: 01383 820 111 EMAIL: sales@whitelineautomotive.co.uk