AAC Valve Cleaning - DIY - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Andy Hornsby · 4th July 2006, 12:33 PM

A mate of mine came across this on the SAU site.

http://www.skylinesaustralia.com/for...owtopic=110431

Have a read guys, I recon this might be a good little maintainance job which could solve a few idling issues. Looks to be an easy job too.

Andy.

anthonymcgrath · 5th July 2006, 03:21 PM

this tutorial worked a treat - its rock solid at 6-700rpm seems to be smoother when dawdling at lower speeds (20-30mph) whereas previously it was a little erratic

ta
ant

Andy Hornsby · 10th July 2006, 01:39 PM

Carried this out on Saturday morning. It only took 25mins to do and has made the car idle smoother.

anthonymcgrath · 12th September 2006, 02:32 PM

been told I may have to clean mine again with having a pfc fitted as the pfc handles the solenoid activation inside the aac differently from the original ecu.

4th July 2006, 12:33 PM	#1 (permalink)
Andy Hornsby GTROC Member Join Date: Mar 2003 Location: Blyth, Northumberland. Posts: 3,100	AAC Valve Cleaning - DIY A mate of mine came across this on the SAU site. http://www.skylinesaustralia.com/for...owtopic=110431 Have a read guys, I recon this might be a good little maintainance job which could solve a few idling issues. Looks to be an easy job too. Andy. __________________ GTROC Northern Trackday Rep. http://www.gtr.co.uk/forum/109777-my-1996-r33-gts-t.html

10th July 2006, 01:39 PM	#3 (permalink)
Andy Hornsby GTROC Member Join Date: Mar 2003 Location: Blyth, Northumberland. Posts: 3,100	Carried this out on Saturday morning. It only took 25mins to do and has made the car idle smoother. __________________ GTROC Northern Trackday Rep. http://www.gtr.co.uk/forum/109777-my-1996-r33-gts-t.html

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

5th July 2006, 03:21 PM	#2 (permalink)
anthonymcgrath GTR Register Member Join Date: Feb 2005 Location: Merseyside Posts: 1,213	this tutorial worked a treat - its rock solid at 6-700rpm seems to be smoother when dawdling at lower speeds (20-30mph) whereas previously it was a little erratic ta ant

12th September 2006, 02:32 PM	#4 (permalink)
anthonymcgrath GTR Register Member Join Date: Feb 2005 Location: Merseyside Posts: 1,213	been told I may have to clean mine again with having a pfc fitted as the pfc handles the solenoid activation inside the aac differently from the original ecu.