SSR SP1 Professor 18x11J - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Dan E · 10th July 2006, 07:11 PM

I bought these wheels to put on my 200sx, but have since found some other (even sillier) wheels that I've fallen for.

Hopefully these will interest someone on here.

These wheels are big, make no mistake. I'm not in touch with my skyline width and offsets, but I doubt these will fit straight on. Having said that, they are worth the effort... they are the best condition second hand wheels I've seen, there is no curbing at all. My crappy camera phone does not do them justice.

The specs:

2 * 18x11J +19 (90mm dish)
2 * 18x11J +16 (110mm dish)

Bare rims, no tyres.

I believe they were on a 350Z in the land of Jap, so should clear skyline brakes ok.

On to the pics:

The price:
£1300

Would prefer collection from near Milton Keynes, but can arrange courier at buyers expense.

Cheers,
Dan

beario · 10th July 2006, 09:49 PM

dribble dribble

cypher · 10th July 2006, 11:13 PM

would they fit an r33 gtst?sorry, still new to all this!

bladerider · 10th July 2006, 11:39 PM

Nope.

Nice rimmage btw !!

:drool:

JulesS14200 · 11th July 2006, 10:02 AM

Dan, I wish you hadn't bought 11 inch rims for the front of a 200 otherwise I would of had these

koopa · 11th July 2006, 10:56 AM

-tugs frantically-

1000bhp · 11th July 2006, 01:56 PM

Does anybody know what would be needed for these to fit an R33 GTR with no rubbing?

Ian C · 11th July 2006, 05:29 PM

Quote:

Originally Posted by 1000bhp

Does anybody know what would be needed for these to fit an R33 GTR with no rubbing?

Probably the suspension kit from Bigfoot!

My R33 runs 18 x 9.5 with a 22mm offset and they are very very close to rubbing with Trust Downmax springs on full lock.......

Putting this into my wheel calc you get the following:

(Based on)
Standard R33 rims
17 x 9 ET30

so, changes to 18 x 11 ET16
WHEEL INNER FACE MOVES INBOARD BY 11.4mm
WHEEL OUTER FACE MOVES OUTBOARD BY 39.4mm

Changes with the 18 x 11 ET19 are
WHEEL INNER FACE MOVES INBOARD BY 14.4mm
WHEEL OUTER FACE MOVES OUTBOARD BY 36.4mm

I think you are really going to struggle with the wheels being proud of the arches.....Mine sit very nicely in the arch now and the outer face moves outboard by just 14.4mm!

not saying it can't be done, but it may need bodywork mods!

Ian

Dan E · 13th July 2006, 11:57 AM

Bump.

Did some googling. This is apparently a pic of 18x10.5 +15 fitted to a R33 GTR with 265 tyres. If that's the case, then any work to get the 11s to fit should be minimal. Who wants to try them on and see if they do fit?

Faz Choudhury · 13th July 2006, 09:31 PM

Quote:

Originally Posted by Dan E

Bump.

Did some googling. This is apparently a pic of 18x10.5 +15 fitted to a R33 GTR with 265 tyres. If that's the case, then any work to get the 11s to fit should be minimal. Who wants to try them on and see if they do fit?

hi mate....really really interested. if they fit i can make you an offer just need someone to confirm they would fit!!

Faz

Dan E · 13th July 2006, 10:27 PM

Come and try them

Dan E · 15th August 2006, 03:09 PM

Still available

cefiro_drifter · 15th August 2006, 03:58 PM

if it helps i had 10j et13 255's on my cef and it only rubbed on the rear bumper and was about 5mm away from the suspesion on full lock.. They came off an R33 and was no sign of rubbing on the tyres so they should be ok with prob very minimal rubbing

MADsteve · 15th August 2006, 03:59 PM

I'm very near to MK, so could pop over and confirm fitment for anybody interested?

Steve

Dan E · 30th August 2006, 12:34 PM

Now on ebay

10th July 2006, 07:11 PM	#1 (permalink)
Dan E GTR Register Member Join Date: Feb 2005 Location: Near MK Posts: 40	SSR SP1 Professor 18x11J I bought these wheels to put on my 200sx, but have since found some other (even sillier) wheels that I've fallen for. Hopefully these will interest someone on here. These wheels are big, make no mistake. I'm not in touch with my skyline width and offsets, but I doubt these will fit straight on. Having said that, they are worth the effort... they are the best condition second hand wheels I've seen, there is no curbing at all. My crappy camera phone does not do them justice. The specs: 2 * 18x11J +19 (90mm dish) 2 * 18x11J +16 (110mm dish) Bare rims, no tyres. I believe they were on a 350Z in the land of Jap, so should clear skyline brakes ok. On to the pics: The price: £1300 Would prefer collection from near Milton Keynes, but can arrange courier at buyers expense. Cheers, Dan

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10th July 2006, 09:49 PM	#2 (permalink)
beario GTR Register Member Join Date: Feb 2004 Posts: 1,076	dribble dribble

10th July 2006, 11:13 PM	#3 (permalink)
cypher GTR Register Member Join Date: Mar 2006 Location: Lincoln/Grantham Posts: 114	would they fit an r33 gtst?sorry, still new to all this!

10th July 2006, 11:39 PM	#4 (permalink)
bladerider GTR Register Member Join Date: Jun 2002 Location: Soon to be in a fridge !!! Posts: 5,023	Nope. Nice rimmage btw !! :drool:

11th July 2006, 10:02 AM	#5 (permalink)
JulesS14200 GTR Register Member Join Date: Sep 2005 Location: Surrey/Middx Posts: 142	Dan, I wish you hadn't bought 11 inch rims for the front of a 200 otherwise I would of had these

11th July 2006, 10:56 AM	#6 (permalink)
koopa GTR Register Member Join Date: Aug 2005 Location: glasgow / in the boxing ring training Posts: 936	-tugs frantically-

11th July 2006, 01:56 PM	#7 (permalink)
1000bhp New Users Join Date: Apr 2005 Location: North Yorkshire Posts: 437	Does anybody know what would be needed for these to fit an R33 GTR with no rubbing?

13th July 2006, 11:57 AM	#9 (permalink)
Dan E GTR Register Member Join Date: Feb 2005 Location: Near MK Posts: 40	Bump. Did some googling. This is apparently a pic of 18x10.5 +15 fitted to a R33 GTR with 265 tyres. If that's the case, then any work to get the 11s to fit should be minimal. Who wants to try them on and see if they do fit?

13th July 2006, 10:27 PM	#11 (permalink)
Dan E GTR Register Member Join Date: Feb 2005 Location: Near MK Posts: 40	Come and try them

15th August 2006, 03:09 PM	#12 (permalink)
Dan E GTR Register Member Join Date: Feb 2005 Location: Near MK Posts: 40	Still available

15th August 2006, 03:58 PM	#13 (permalink)
cefiro_drifter GTR Register Member Join Date: Jan 2006 Location: surrey Posts: 213	if it helps i had 10j et13 255's on my cef and it only rubbed on the rear bumper and was about 5mm away from the suspesion on full lock.. They came off an R33 and was no sign of rubbing on the tyres so they should be ok with prob very minimal rubbing

15th August 2006, 03:59 PM	#14 (permalink)
MADsteve GTR Register Member Join Date: Nov 2004 Location: GTR Heaven Posts: 2,294	I'm very near to MK, so could pop over and confirm fitment for anybody interested? Steve

30th August 2006, 12:34 PM	#15 (permalink)
Dan E GTR Register Member Join Date: Feb 2005 Location: Near MK Posts: 40	Now on ebay