17" rims - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Fuggles · 12th July 2006, 06:03 PM

Needed to fit and R33 GTR.
Not worried about condition or make

Cossie1 · 12th July 2006, 08:58 PM

Dunno if they any use to you, but I have a set of 4 white enkei Wrc Tarmac Evo rims.

I bought these for my Evo 6, but never got around to fitting them.

There 8 x 17" and there 114.3 pcd with a centre bore of 67.1mm

They should clear the brembo's as they clear them on the evo 6, however im not sure of the offset of them.

if your interested let me know. they do need a lick of paint around the edges as there is some minor scuffing.

MarkFTO · 12th July 2006, 09:27 PM

Cossie1, If Fuggles isnt interested let me know how much you are after for them as id be interested.

I have a set of 17x8" PCD 114.3 (can find the bore and offset) Enkei RP02s in average condition fitted with half worn slicks. Let me know if they would be of any interest.

paul creed · 12th July 2006, 10:17 PM

Quote:

Originally Posted by Fuggles

Needed to fit and R33 GTR.
Not worried about condition or make

You can have mine if you have something decent to exchange with

12th July 2006, 06:03 PM	#1 (permalink)
Fuggles GTROC Chairman Join Date: Jul 2001 Location: UK Posts: 16,942	17" rims Needed to fit and R33 GTR. Not worried about condition or make __________________ . GTROC chairman Please feel free to contact me with any GTROC questions send an email to info@gtr.co.uk or send a PM

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

12th July 2006, 08:58 PM	#2 (permalink)
Cossie1 GTR Register Member Join Date: Nov 2005 Location: Gloucestershire Posts: 350	Dunno if they any use to you, but I have a set of 4 white enkei Wrc Tarmac Evo rims. I bought these for my Evo 6, but never got around to fitting them. There 8 x 17" and there 114.3 pcd with a centre bore of 67.1mm They should clear the brembo's as they clear them on the evo 6, however im not sure of the offset of them. if your interested let me know. they do need a lick of paint around the edges as there is some minor scuffing.

12th July 2006, 09:27 PM	#3 (permalink)
MarkFTO GTR Register Member Join Date: Jun 2002 Location: Paisley, Scotland Posts: 323	Cossie1, If Fuggles isnt interested let me know how much you are after for them as id be interested. I have a set of 17x8" PCD 114.3 (can find the bore and offset) Enkei RP02s in average condition fitted with half worn slicks. Let me know if they would be of any interest.