brakes available - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

PMJ · 4th November 2002, 10:29 AM

Does anyone know what brake upgrades are available for the GTR other than the AP kit..

DCD · 4th November 2002, 10:54 AM

TarOx
Alcon
Brembo
Project µ
Endless
Willwood
Winmax

Think thats about it...

somberg · 4th November 2002, 11:38 AM

One more:

StopTech

www.stoptech.com

DCD · 4th November 2002, 12:10 PM

oh, and Move it...

http://www.movit.de/

Philip · 4th November 2002, 12:15 PM

... and KAD http://www.kad-uk.com/brakekits2.htm .

Phil

GTuned · 4th November 2002, 12:49 PM

Which inevitably leads to the next question which is the best

OK on a more serious note, Dino, where did you hear of the Wilwood kit? There is an R32 GT-R here with Wilwood Calipers, however, as far as I know, they are mounted on custom brackets..??

Do you know if they make a kit? I have good experience with them in the US.

DCD · 4th November 2002, 01:13 PM

I've know of Willwood for quite some time. They make 340mm & 355mm rotors combined with 6 pot calipers for R32/33/34s. They are sold here in Japan through Pool Getti which I think takes care of the brackets and general fitting .... they were also featured in GTR Magazine a few times.

PMJ · 4th November 2002, 02:12 PM

Do you have a link to the web site, i too cant find any indication that willwood cover the GTR...

DCD · 4th November 2002, 02:25 PM

sorry I don't think they have a site...I have a phone number though

tigger · 4th November 2002, 05:29 PM

And Hispec monster brake conversion

PMJ · 4th November 2002, 09:23 PM

Should have know that one Eh Tigger.....

Any body have the hispec brake conversion, if so what are they like.... I had a set on my Pulsar ( there are still on the GTiR) andthought they were very good, although I have heard some bad things about other GTiR conversions... wondered if it was the same on the GTR...

4th November 2002, 10:29 AM	#1 (permalink)
PMJ GTROC Member Join Date: Sep 2001 Location: In Cuckoo Land Posts: 1,626	brakes available Does anyone know what brake upgrades are available for the GTR other than the AP kit.. __________________ Paul J, "The Berkshire Flyers The Ratpac

4th November 2002, 02:12 PM	#8 (permalink)
PMJ GTROC Member Join Date: Sep 2001 Location: In Cuckoo Land Posts: 1,626	DCD Do you have a link to the web site, i too cant find any indication that willwood cover the GTR... __________________ Paul J, "The Berkshire Flyers The Ratpac

4th November 2002, 09:23 PM	#11 (permalink)
PMJ GTROC Member Join Date: Sep 2001 Location: In Cuckoo Land Posts: 1,626	Hi Spec Should have know that one Eh Tigger..... Any body have the hispec brake conversion, if so what are they like.... I had a set on my Pulsar ( there are still on the GTiR) andthought they were very good, although I have heard some bad things about other GTiR conversions... wondered if it was the same on the GTR... __________________ Paul J, "The Berkshire Flyers The Ratpac

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

4th November 2002, 10:54 AM	#2 (permalink)
DCD GTR Register Member Join Date: Jun 2001 Location: Tokyo Posts: 9,336	TarOx Alcon Brembo Project µ Endless Willwood Winmax Think thats about it...

4th November 2002, 11:38 AM	#3 (permalink)
somberg GTR Register Member Join Date: Jun 2001 Location: Close to Ringland. Posts: 2,044	One more: StopTech www.stoptech.com

4th November 2002, 12:10 PM	#4 (permalink)
DCD GTR Register Member Join Date: Jun 2001 Location: Tokyo Posts: 9,336	oh, and Move it... http://www.movit.de/

4th November 2002, 12:15 PM	#5 (permalink)
Philip GTR Register Member Join Date: Jan 2002 Posts: 1,854	... and KAD http://www.kad-uk.com/brakekits2.htm . Phil

4th November 2002, 12:49 PM	#6 (permalink)
GTuned New Users Join Date: Mar 2002 Location: Cyprus Posts: 657	Which inevitably leads to the next question which is the best OK on a more serious note, Dino, where did you hear of the Wilwood kit? There is an R32 GT-R here with Wilwood Calipers, however, as far as I know, they are mounted on custom brackets..?? Do you know if they make a kit? I have good experience with them in the US.

4th November 2002, 01:13 PM	#7 (permalink)
DCD GTR Register Member Join Date: Jun 2001 Location: Tokyo Posts: 9,336	I've know of Willwood for quite some time. They make 340mm & 355mm rotors combined with 6 pot calipers for R32/33/34s. They are sold here in Japan through Pool Getti which I think takes care of the brackets and general fitting .... they were also featured in GTR Magazine a few times.

4th November 2002, 02:25 PM	#9 (permalink)
DCD GTR Register Member Join Date: Jun 2001 Location: Tokyo Posts: 9,336	sorry I don't think they have a site...I have a phone number though

4th November 2002, 05:29 PM	#10 (permalink)
tigger GTR Register Member Join Date: Jan 2002 Posts: 2,209	And Hispec monster brake conversion