Re-Build needed - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

nick the tubman · 21st August 2006, 08:49 PM

Hi there.
i have just blown up my engine @ the nurburg and need i re-build.
apparently my car (1996 r33 gtr, v-spec) was not mapped properly. it has been suggested piston No.6 has gone due to detonation.
i am looking to install some forged pistons, uprated con rods and a metal head gasket -. i want a VERY reliable 450bhp. it will need a full map as well.

the car seems to have been uprated in many ways already, including:-
Exedy triple plate clutch,
HKS straight through exhaust
HKS induction, filters & hard pipes
HKS racing intercooler
HKS 264 cams & wheels
HKS oil cooler
trust baffled sump
HKS F-con Pro ECU
MINES attessa ECU
Garret N1 turbos
greddy profec 2 boost controller & recoed unit

can you give me a budgetary price for the re-build & mapping? will it produce the BHP figure i have quoted? will the re-build be warrantied?

you can call me directly to discuss if required on 07734 791 216

Nick

rockabilly · 22nd August 2006, 03:56 PM

contact car32 on the soc forum mate. he is in bamber bridge i think you might be in luck...

Abbey M/S · 22nd August 2006, 04:03 PM

Nick,

good to speak to you today I have a estimate e-mailed to you within the next couple of days.

Mark

21st August 2006, 08:49 PM	#1 (permalink)
nick the tubman New Users Join Date: Jun 2006 Location: preston Posts: 388	Re-Build needed Hi there. i have just blown up my engine @ the nurburg and need i re-build. apparently my car (1996 r33 gtr, v-spec) was not mapped properly. it has been suggested piston No.6 has gone due to detonation. i am looking to install some forged pistons, uprated con rods and a metal head gasket -. i want a VERY reliable 450bhp. it will need a full map as well. the car seems to have been uprated in many ways already, including:- Exedy triple plate clutch, HKS straight through exhaust HKS induction, filters & hard pipes HKS racing intercooler HKS 264 cams & wheels HKS oil cooler trust baffled sump HKS F-con Pro ECU MINES attessa ECU Garret N1 turbos greddy profec 2 boost controller & recoed unit can you give me a budgetary price for the re-build & mapping? will it produce the BHP figure i have quoted? will the re-build be warrantied? you can call me directly to discuss if required on 07734 791 216 Nick

22nd August 2006, 03:56 PM	#2 (permalink)
rockabilly rb30 710bhp Join Date: Oct 2003 Location: lancashire Posts: 1,049	contact car32 on the soc forum mate. he is in bamber bridge i think you might be in luck... __________________ fancy the south of france. http://st-tropez.mysite.orange.co.uk/

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

22nd August 2006, 04:03 PM	#3 (permalink)
Abbey M/S GTR Register Member Join Date: Feb 2002 Location: The workshop... Posts: 1,922	Nick, good to speak to you today I have a estimate e-mailed to you within the next couple of days. Mark