outer window seal trims (R32GTR) - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

callumGTR · 23rd August 2006, 12:10 PM

as above, driver & passenger side needed for an R32GTR if anyone can help, must be in mintish condition, THANKS

blueskygtr · 23rd August 2006, 07:52 PM

yhpm

Presuming you mean the steel bit that screws on to the door frame itself

I have a driver side one mate but not the pass side Its in good nick £15 plus delivery

callumGTR · 24th August 2006, 11:31 AM

hi blue, thanks for the reply, i dont think they screw on just clip in, its the long black metal trim that runs along the top of the door (bottom of window) the black coating on mine have cracked & flaking off, havent got any pics to show you what i mean sorry

callumGTR · 24th August 2006, 11:32 AM

from the wing mirror to the end of the door

callumGTR · 4th April 2007, 11:52 AM

still need one

Jim27 · 4th April 2007, 12:44 PM

Are they rubber, plastic or metal? If they're plastic or metal you could just get them repainted. It'll be a LOT cheaper than buying new!!

whoflungdung · 4th April 2007, 05:55 PM

Quote:

Originally Posted by callumGTR

as above, driver & passenger side needed for an R32GTR if anyone can help, must be in mintish condition, THANKS

BNR32 LH/RH window trim 76870-04U00 & 7687104U0 56,600 JPY

contact adam at info@feast-ae-rs.com

they are £75 each here from nissan

callumGTR · 7th April 2007, 10:05 AM

thanks whof, as im seller the car i was hoping to get hold of good second hand set, but ill keep that in mind if all else fails, the car will hopefully be at santa pod tomorrow so if anyone here is going bring a set down with you

THANKS AGAIN FOR YOUR REPLYS

23rd August 2006, 12:10 PM	#1 (permalink)
callumGTR GTROC Member Join Date: Jun 2006 Posts: 361	outer window seal trims (R32GTR) as above, driver & passenger side needed for an R32GTR if anyone can help, must be in mintish condition, THANKS

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

23rd August 2006, 07:52 PM	#2 (permalink)
blueskygtr GTR Register Member Join Date: Mar 2004 Location: NORWICH Posts: 1,558	yhpm Presuming you mean the steel bit that screws on to the door frame itself I have a driver side one mate but not the pass side Its in good nick £15 plus delivery

24th August 2006, 11:31 AM	#3 (permalink)
callumGTR GTROC Member Join Date: Jun 2006 Posts: 361	hi blue, thanks for the reply, i dont think they screw on just clip in, its the long black metal trim that runs along the top of the door (bottom of window) the black coating on mine have cracked & flaking off, havent got any pics to show you what i mean sorry

24th August 2006, 11:32 AM	#4 (permalink)
callumGTR GTROC Member Join Date: Jun 2006 Posts: 361	from the wing mirror to the end of the door

4th April 2007, 11:52 AM	#5 (permalink)
callumGTR GTROC Member Join Date: Jun 2006 Posts: 361	still need one

4th April 2007, 12:44 PM	#6 (permalink)
Jim27 GTR Register Member Join Date: Jul 2004 Location: Bolton Posts: 4,478	Are they rubber, plastic or metal? If they're plastic or metal you could just get them repainted. It'll be a LOT cheaper than buying new!!

7th April 2007, 10:05 AM	#8 (permalink)
callumGTR GTROC Member Join Date: Jun 2006 Posts: 361	thanks whof, as im seller the car i was hoping to get hold of good second hand set, but ill keep that in mind if all else fails, the car will hopefully be at santa pod tomorrow so if anyone here is going bring a set down with you THANKS AGAIN FOR YOUR REPLYS