numbers needed to order big end bearings - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

brettmaz · 15th September 2006, 12:40 PM

hi can you help

i am tring to order new shells for existing crankshaft for my r33 rb26dett,
i have both numbers from crankshaft but can;t find number on engine block

any ideas or diagrams please

Abbey M/S · 15th September 2006, 05:04 PM

numbers are stamped on the block on the left hand side as you look at the block from the front of the block.

GTR RICH · 15th September 2006, 05:07 PM

by back of alternator & oil dip stick ,if this helps

15th September 2006, 12:40 PM	#1 (permalink)
brettmaz New Users Join Date: Jul 2006 Posts: 1	numbers needed to order big end bearings hi can you help i am tring to order new shells for existing crankshaft for my r33 rb26dett, i have both numbers from crankshaft but can;t find number on engine block any ideas or diagrams please

15th September 2006, 05:07 PM	#3 (permalink)
GTR RICH GTR Register Member Join Date: Oct 2005 Location: Medway Posts: 1,274	by back of alternator & oil dip stick ,if this helps Last edited by GTR RICH; 15th September 2006 at 05:19 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

15th September 2006, 05:04 PM	#2 (permalink)
Abbey M/S GTR Register Member Join Date: Feb 2002 Location: The workshop... Posts: 1,922	numbers are stamped on the block on the left hand side as you look at the block from the front of the block.