350Z BREMBO brakes on my R32 GTR - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

skyboy · 3rd October 2006, 08:51 AM

I got a friend who's going to have a set of endless 6pot on his 350Z (just for the front). I'm wondering if I can use his std Brembo brake (with brake discs) as a upgrade for my R32 GTR. I got 18' wheels so there should be enough room for it. Is it going to be a straight fit?

bazgtr · 5th October 2006, 09:02 PM

I read somewhere that the brembo set up on the 350z has the wrong angle on the calipers when mounted. It's something like 6% degress out.

Can't remember where I read it, But Abbey, RB motorsport or Sumo power should clear it up.

I research this option months ago, Since then I've found a R34 GTR set.

If I was you I'd go for the new K-sport brake option which comes with 356mm or 330mm discs, Calipers, Pads, Brackets etc. £1000

3rd October 2006, 08:51 AM	#1 (permalink)
skyboy GTR Register Member Join Date: Sep 2005 Location: MANCHESTER Posts: 45	350Z BREMBO brakes on my R32 GTR I got a friend who's going to have a set of endless 6pot on his 350Z (just for the front). I'm wondering if I can use his std Brembo brake (with brake discs) as a upgrade for my R32 GTR. I got 18' wheels so there should be enough room for it. Is it going to be a straight fit?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

5th October 2006, 09:02 PM	#2 (permalink)
bazgtr GTR Register Member Join Date: Aug 2004 Location: SWANSEA Posts: 706	I read somewhere that the brembo set up on the 350z has the wrong angle on the calipers when mounted. It's something like 6% degress out. Can't remember where I read it, But Abbey, RB motorsport or Sumo power should clear it up. I research this option months ago, Since then I've found a R34 GTR set. If I was you I'd go for the new K-sport brake option which comes with 356mm or 330mm discs, Calipers, Pads, Brackets etc. £1000