Engine Bearings - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

NigelR32 · 8th October 2006, 05:28 PM

Hi,

I am in need of a set of Mains and Big Ends for my RB26DETT. The Crank is unground.

WHY???

Regards

Asim R32GTR · 8th October 2006, 05:48 PM

Quote:

Originally Posted by NigelR32

Hi,

I am in need of a set of Mains and Big Ends for my RB26DETT. The Crank is unground.

WHY???

Regards

Contact rob in NZ R.I.P.S
I ordered a set for my friend. He has the ACL race bearings in stock. Very good price also.

I bouth mine from abbey, and paid twice than what Rob charged.

Quote:

mains and big end bearings for R33 RB26dett for nz$387.50 including shipping to you on a 5-7 day service.

from his mail to me. Shipping is to Norway.
That is about 140gbp.

Asim...

NigelR32 · 8th October 2006, 06:49 PM

Thanks for the Info Asim. I've contacted R.I.P.S., and am now awaiting a reply.

Regards

Simonh · 8th October 2006, 06:57 PM

don't you have to polish the crank with the ACL berings to ensure the clearances are correct?

Simon

Asim R32GTR · 8th October 2006, 07:07 PM

Quote:

Originally Posted by Simonh

don't you have to polish the crank with the ACL berings to ensure the clearances are correct?

Simon

I would never put a engine together without polishing the crank and checking clearance on main and conrod bearings...

To much work if its wrong...

car32 · 8th October 2006, 09:21 PM

you can get acl bearings over here,duraglide or race.your looking at about £150 for the full set

8th October 2006, 05:28 PM	#1 (permalink)
NigelR32 GTR Register Member Join Date: Jul 2002 Location: RB26ville Posts: 916	Engine Bearings Hi, I am in need of a set of Mains and Big Ends for my RB26DETT. The Crank is unground. WHY??? Regards __________________ Nigel...........GTROC Member Now on '32GTR No.3

8th October 2006, 06:49 PM	#3 (permalink)
NigelR32 GTR Register Member Join Date: Jul 2002 Location: RB26ville Posts: 916	Thanks for the Info Asim. I've contacted R.I.P.S., and am now awaiting a reply. Regards __________________ Nigel...........GTROC Member Now on '32GTR No.3

8th October 2006, 06:57 PM	#4 (permalink)
Simonh GTROC Member Join Date: May 2002 Location: Nottingham Posts: 3,024	don't you have to polish the crank with the ACL berings to ensure the clearances are correct? Simon __________________ Composite Design Studio webpage Doing it is not enough - it has to be done right. My Auto Journal

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

8th October 2006, 09:21 PM	#6 (permalink)
car32 GTR Register Member Join Date: Oct 2003 Location: preston Posts: 358	you can get acl bearings over here,duraglide or race.your looking at about £150 for the full set