my new 32, and pics of the fleet - Page 6 - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Rostampoor · 7th February 2007, 02:06 PM

Looking good there Adam.

Adam Kindness · 7th February 2007, 05:41 PM

thats the rears in now too

its much much better now :lol:

Havent adjusted heights etc properly yet, just put them on at what i thought might be ok.

Still the fit the EDFC motors and headunits.... do that tomorrow maybe

Adam Kindness · 8th February 2007, 06:46 PM

dampning EDFC's fitted... bit of a fiddly pain in the boobies, but done.
Also have the 2nd unit mounted, and wired. Just need to mount the motors on the reservoirs

fitted the two EDFC's for front rebound (on remote reservoirs), and put the loom in place for the rears. Just need to mount the rears on the adjusters then thats it

and a wee sticker.... cool .jp one eh

CarCouture · 9th February 2007, 11:44 AM

Hi Adam,

looks good there, installation was ok, wasn't it?
What about your left knee space, wont the EDFC units disturb?

How do the coilovers feel, how is sreet driveability?

Thomas

Adam Kindness · 9th February 2007, 12:50 PM

the two controllers are fine... a good few inches to spare

only mounted with velco for now so can easily move.

Installation was easy. Its pretty harsh on the street but i can put up with it for what driving will be getting done on the road.... very little.

I put a couple of your wee stickers on today too

all fitted now

skytoy · 9th February 2007, 05:56 PM

This is looking good. Cant wait to see it at knockhill.

Adam Kindness · 12th February 2007, 05:46 PM

Slicks fitted to rims

ollam69 · 12th February 2007, 07:01 PM

Bloody impressive!!! what rims are they?

Adam Kindness · 12th February 2007, 07:26 PM

Kai Office, Modia 17x10

Adam Kindness · 13th February 2007, 01:53 PM

just some side on and square shots for design mock-ups

and the wheels popped up against the side.

ollam69 · 13th February 2007, 02:36 PM

Looking really good! how much were the slicks? do you have a supplier for them?

Adam Kindness · 13th February 2007, 04:32 PM

ex BTCC testing slicks, i got 6 for £100 from a friend.

Adam Kindness · 1st March 2007, 08:59 AM

changed the drivers seat mount

FROM - My home made bingo bodge
TO - Driftworks low mount - £119 :!

Seat does sit a lot lower though, and slides a bit easier than my makeshift one :lol:

Also stripped the floor behind the seat and painted it too.

Adam Kindness · 5th March 2007, 03:56 PM

ran a 12.7 at 109 on sunday.... good bench mark for apparant 283bhp spec LOL

new bits today

new Tomei Head, Inlet, Exhaust and throttle bodie gaskets

Project Mu front discs.... gay colour.... :lol:
APP front and rear braided steel brake lines

Tomei rod bolts

Adam Kindness · 5th March 2007, 03:57 PM

the brakes are just a stop gap solution untill the 1k plus is justifable to spend on brakes. The current setup (DIY re furbed stock R32 calipers with DS3000's MSstopper) seem fine with the power/pace it has just now.

DBA discs may have been better though

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

7th February 2007, 02:06 PM	#76 (permalink)
Rostampoor GTR Register Member Join Date: Nov 2006 Posts: 605	Looking good there Adam.

7th February 2007, 05:41 PM	#77 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	thats the rears in now too its much much better now :lol: Havent adjusted heights etc properly yet, just put them on at what i thought might be ok. Still the fit the EDFC motors and headunits.... do that tomorrow maybe

8th February 2007, 06:46 PM	#78 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	dampning EDFC's fitted... bit of a fiddly pain in the boobies, but done. Also have the 2nd unit mounted, and wired. Just need to mount the motors on the reservoirs fitted the two EDFC's for front rebound (on remote reservoirs), and put the loom in place for the rears. Just need to mount the rears on the adjusters then thats it and a wee sticker.... cool .jp one eh

9th February 2007, 11:44 AM	#79 (permalink)
CarCouture GTR Register Member Join Date: Dec 2005 Location: Slovakia Posts: 47	Hi Adam, looks good there, installation was ok, wasn't it? What about your left knee space, wont the EDFC units disturb? How do the coilovers feel, how is sreet driveability? Thomas

9th February 2007, 12:50 PM	#80 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	the two controllers are fine... a good few inches to spare only mounted with velco for now so can easily move. Installation was easy. Its pretty harsh on the street but i can put up with it for what driving will be getting done on the road.... very little. I put a couple of your wee stickers on today too all fitted now

9th February 2007, 05:56 PM	#81 (permalink)
skytoy GTR Register Member Join Date: Sep 2006 Posts: 418	This is looking good. Cant wait to see it at knockhill.

12th February 2007, 05:46 PM	#82 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	Slicks fitted to rims

12th February 2007, 07:01 PM	#83 (permalink)
ollam69 Banned Join Date: Jun 2006 Posts: 336	Bloody impressive!!! what rims are they?

12th February 2007, 07:26 PM	#84 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	Kai Office, Modia 17x10

13th February 2007, 01:53 PM	#85 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	just some side on and square shots for design mock-ups and the wheels popped up against the side.

13th February 2007, 02:36 PM	#86 (permalink)
ollam69 Banned Join Date: Jun 2006 Posts: 336	Looking really good! how much were the slicks? do you have a supplier for them?

13th February 2007, 04:32 PM	#87 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	ex BTCC testing slicks, i got 6 for £100 from a friend.

1st March 2007, 08:59 AM	#88 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	changed the drivers seat mount FROM - My home made bingo bodge TO - Driftworks low mount - £119 :! Seat does sit a lot lower though, and slides a bit easier than my makeshift one :lol: Also stripped the floor behind the seat and painted it too.

5th March 2007, 03:56 PM	#89 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	ran a 12.7 at 109 on sunday.... good bench mark for apparant 283bhp spec LOL new bits today new Tomei Head, Inlet, Exhaust and throttle bodie gaskets Project Mu front discs.... gay colour.... :lol: APP front and rear braided steel brake lines Tomei rod bolts

5th March 2007, 03:57 PM	#90 (permalink)
Adam Kindness GTR Register Member Join Date: Jun 2002 Location: Aberdeen Posts: 2,237	the brakes are just a stop gap solution untill the 1k plus is justifable to spend on brakes. The current setup (DIY re furbed stock R32 calipers with DS3000's MSstopper) seem fine with the power/pace it has just now. DBA discs may have been better though