H.I.D Fitting guide - R33 GTR - Page 3 - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

GTAHH · 19th September 2007, 01:14 AM

These HID's look great.

How do these compare to the Genuine Series III Xenons from Nissan?

Besides the price difference - are they the same?

Cheers for the fitting guide.

Alan · 19th September 2007, 01:31 PM

Quote:

Originally Posted by mr_abate

hiya.i no this thread is quite old now, but may i ask what have u done with ur indicators?looks so much better without!

I have moved my indicators to where the side lights were and got some white led string run it round the headlamps for the side lights.

TREG · 11th November 2007, 10:18 AM

Cheers Mook, Iv got to have a go doing this so this is going to be helpful-I hope!!

mr_abate · 11th November 2007, 07:19 PM

quality sounds like a plan.how difficult was it to do?got any photos of the beast?
cheers for the reply

Steve · 23rd April 2008, 10:37 AM

Indicators??? People should know which way you are gonna turn by the huge power slide !!! LOL

Cliff J · 30th April 2008, 03:49 PM

Thanks for the fitting guide Mookistar, im attempting mine this weekend and found this thread while searching for help before I fook it up

Cliff J · 9th May 2008, 11:39 AM

The guide worked a treat thank you

I got stuck with the supplied instructions, checked this thread and it all became clear and was done within no time at all

Cheers Mookistar, top man

SPEED MERCHANT · 10th May 2008, 07:51 PM

Cheers for the guide MOOK which I've now bookmarked for when I get mine shortly.

I'm still trying to work out this main beam / dipped headlight / full beam stuff with HID's ... Just one of those things I can't get my head round.

6rockmonkey9 · 25th August 2008, 02:06 PM

Did anyone change their headlights to HID projectors or are they still using the Halogen reflectors? From experience the halogen reflectors produce too much glare and would fail an MOT test because there isn't a proper cut-off point, which wouldn't make such a big fuss if it were normal lights, but these HID's are too bright and need a perfect cut off point and pattern.

Nice guide mookistar, but might wanna relocate that ballast from underneath your air filters they produce quite a bit of heat.

cohe2005 · 22nd September 2008, 07:18 PM

My 32 has already got these hid lights in,,but i get no brightness out of them,,are they gas filled,,and if so can i replace the bulbs,it looks like my bulbs where sealed in ,any ideas,,?,,thanx

23rd April 2008, 10:37 AM	#35 (permalink)
Steve GTROC Member Join Date: Sep 2001 Location: Berkshire Posts: 1,869	Indicators??? People should know which way you are gonna turn by the huge power slide !!! LOL __________________ Keep it on the Black Stuff Steve + A-BEUT HARDCORE MEMBER

10th May 2008, 07:51 PM	#38 (permalink)
SPEED MERCHANT GTROC Member Join Date: Jun 2006 Location: Gotham City Suburbs Posts: 2,293	Cheers for the guide MOOK which I've now bookmarked for when I get mine shortly. I'm still trying to work out this main beam / dipped headlight / full beam stuff with HID's ... Just one of those things I can't get my head round. __________________ ズピード　マーシャント GTROC E-LINES EDITOR GTROC LONDON REGIONAL REP GTROC BEST R33 'RUNNER UP' 2007 GTROC NATIONAL EVENTS COORDINATOR TEAM NITEWING PROUDLY SPONSORED BY "JAPSALON" , "MeisterR", ECLIPSE CAR AUDIO" & "ATEUK" THE "HOLY PHOTOGRAPHS" COVETED "BAT PHOTOALBUM" !!!

22nd September 2008, 07:18 PM	#40 (permalink)
cohe2005 GTR Register Member Join Date: Aug 2005 Location: Wrexham/Oswestry Posts: 18	replacing, My 32 has already got these hid lights in,,but i get no brightness out of them,,are they gas filled,,and if so can i replace the bulbs,it looks like my bulbs where sealed in ,any ideas,,?,,thanx

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

19th September 2007, 01:14 AM	#31 (permalink)
GTAHH GTR Register Member Join Date: Jun 2007 Posts: 6	These HID's look great. How do these compare to the Genuine Series III Xenons from Nissan? Besides the price difference - are they the same? Cheers for the fitting guide.

11th November 2007, 10:18 AM	#33 (permalink)
TREG GTR Register Member Join Date: May 2004 Location: West sussex. Posts: 3,523	Cheers Mook, Iv got to have a go doing this so this is going to be helpful-I hope!!

11th November 2007, 07:19 PM	#34 (permalink)
mr_abate GTR Register Member Join Date: Nov 2006 Posts: 26	quality sounds like a plan.how difficult was it to do?got any photos of the beast? cheers for the reply

30th April 2008, 03:49 PM	#36 (permalink)
Cliff J GTROC Member Join Date: Jan 2008 Location: High Wycombe Posts: 564	Thanks for the fitting guide Mookistar, im attempting mine this weekend and found this thread while searching for help before I fook it up

9th May 2008, 11:39 AM	#37 (permalink)
Cliff J GTROC Member Join Date: Jan 2008 Location: High Wycombe Posts: 564	The guide worked a treat thank you I got stuck with the supplied instructions, checked this thread and it all became clear and was done within no time at all Cheers Mookistar, top man

25th August 2008, 02:06 PM	#39 (permalink)
6rockmonkey9 New Users Join Date: Jul 2008 Posts: 3	Did anyone change their headlights to HID projectors or are they still using the Halogen reflectors? From experience the halogen reflectors produce too much glare and would fail an MOT test because there isn't a proper cut-off point, which wouldn't make such a big fuss if it were normal lights, but these HID's are too bright and need a perfect cut off point and pattern. Nice guide mookistar, but might wanna relocate that ballast from underneath your air filters they produce quite a bit of heat.