Please ask about individual parts here - Page 11 - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

MickyB · 30th January 2008, 08:57 AM

Hi Rick, spoke to you a while back about getting a set of Splitfires for a R34 GT-T. I'm now ready to order, please PM me a price and where to send the money!

Cheers,

Micky

EndlessR · 31st January 2008, 08:11 AM

Quote:

Originally Posted by MickyB

Hi Rick, spoke to you a while back about getting a set of Splitfires for a R34 GT-T. I'm now ready to order, please PM me a price and where to send the money!

Cheers,

Micky

Hi Micky,

PM sent

Rick

kjansch · 31st January 2008, 01:31 PM

PM sent

th3k3ymast3r · 6th February 2008, 12:14 PM

Hi Rick,

Could you get me a quote for HKS Conrods/Pistons/Crank/Cams for the RNN14 SR20DET. Ideally, want to upgrade stock internals without going down the bore route, if possible. Tomei parts are another alternative.

Any luck with the P11-144 Transmission (Output Shaft:25mmØ24toothed) from either a Primera GT/Primera Sport+? Or even a quote from Nissan may be interesting to compare to.

Were you able to sell the JGTC SR20 Engine/Transmission? I only had one person ask about it on the forum so gave him the Endless-R email.

Regards,
Leigh

eerfaan · 11th February 2008, 07:16 AM

HI NEED A QOUTE ON APEXI POWER FC FOR R33 TWIN TURBO.IF POSSIBLE QOUTE IN US AND DELIVERED TO SWAZILAND

who me? · 22nd February 2008, 10:00 AM

price please for f Con navigator for v pro V.3.24

balloo2u · 24th February 2008, 04:09 PM

Hello,

Would it be possible to get a quote for these?

Rays Gram Light 57S Pro Titanium Lip (18" or 19") to fit R34 GTT

and just to throw it out there, a quote for the Carbon Alloys I have seen floating around.

EndlessR · 27th February 2008, 10:00 AM

Quote:

Originally Posted by balloo2u

Hello,

Would it be possible to get a quote for these?

Rays Gram Light 57S Pro Titanium Lip (18" or 19") to fit R34 GTT

and just to throw it out there, a quote for the Carbon Alloys I have seen floating around.

Hi Balloo

We have a new wheel campagne which we are starting very soon and the Gram Lights are included.

Starts March.....would you like to wait until then?

Rick

balloo2u · 27th February 2008, 02:18 PM

Hi Rick,

Will it be early March, driving round on Slicks at the moment

If so yes.

Quote:

Originally Posted by EndlessR

Hi Balloo

We have a new wheel campagne which we are starting very soon and the Gram Lights are included.

Starts March.....would you like to wait until then?

Rick

EndlessR · 2nd March 2008, 10:23 AM

Quote:

Originally Posted by balloo2u

Hi Rick,

Will it be early March, driving round on Slicks at the moment

If so yes.

Nearly finished it mate, few more days and it will start

rogerdavis · 2nd March 2008, 10:39 AM

A new R32 GTR std Bonnet? how much inc shipping.

balloo2u · 2nd March 2008, 11:33 AM

Sorry bud,

Couldnt wait, went with the ultralite GT-II's in the end.

Would still be interested in a quote though.

thegosson · 3rd March 2008, 05:34 PM

hi how much for two blue silicone caps 20mm ID as in picture link below.including postage to ireland please?

Endless-r -

EndlessR · 8th March 2008, 10:09 AM

Quote:

Originally Posted by rogerdavis

A new R32 GTR std Bonnet? how much inc shipping.

Sorry for the delay guys, Have been rather unwell this week.

Roger, whats your location? (PM is best)

Rick

EndlessR · 8th March 2008, 10:10 AM

Quote:

Originally Posted by balloo2u

Sorry bud,

Couldnt wait, went with the ultralite GT-II's in the end.

Would still be interested in a quote though.

Thats no problem mate, It is nearly finished, we are just getting the final discount (some new wheels for sale now)

Then I can upload them all at the same time,

Rick

31st January 2008, 01:31 PM	#153 (permalink)
kjansch GTROC Member Join Date: May 2005 Location: Speed bump hell Posts: 412	PM sent __________________ White R33 GTR V Spec 24/04/2008 - She's Alive! 520bhp at 1.2 bar and more to come (when I get a hard pipe kit...) 24/05/2008 - She's dead. Spun bearing, or worse - I'll know soon enough... 08/07/2008 - It's worse: bearings, crank, pistons, oil-pump - all shagged. 03/09/2008 - HKS Step 1 (2.8) kit on it's way... 23/09/2008 - HKS Kit has arrived, but in the meantime my turbos have died... 16/10/2008 - She's back from the dead! 389 at the wheels, and oodles of torque, at 1 bar.

11th February 2008, 07:16 AM	#155 (permalink)
eerfaan GTR Register Member Join Date: Oct 2007 Posts: 34	APEXI POWER FC HI NEED A QOUTE ON APEXI POWER FC FOR R33 TWIN TURBO.IF POSSIBLE QOUTE IN US AND DELIVERED TO SWAZILAND

3rd March 2008, 05:34 PM	#163 (permalink)
thegosson GTR Register Member Join Date: Jun 2007 Location: IRELAND Posts: 293	silicone caps hi how much for two blue silicone caps 20mm ID as in picture link below.including postage to ireland please? Endless-r -

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

30th January 2008, 08:57 AM	#151 (permalink)
MickyB GTR Register Member Join Date: Jul 2006 Posts: 77	Hi Rick, spoke to you a while back about getting a set of Splitfires for a R34 GT-T. I'm now ready to order, please PM me a price and where to send the money! Cheers, Micky

6th February 2008, 12:14 PM	#154 (permalink)
th3k3ymast3r GTR Register Member Join Date: Oct 2007 Location: Woking, Surrey, UK Posts: 5	Hi Rick, Could you get me a quote for HKS Conrods/Pistons/Crank/Cams for the RNN14 SR20DET. Ideally, want to upgrade stock internals without going down the bore route, if possible. Tomei parts are another alternative. Any luck with the P11-144 Transmission (Output Shaft:25mmØ24toothed) from either a Primera GT/Primera Sport+? Or even a quote from Nissan may be interesting to compare to. Were you able to sell the JGTC SR20 Engine/Transmission? I only had one person ask about it on the forum so gave him the Endless-R email. Regards, Leigh

22nd February 2008, 10:00 AM	#156 (permalink)
who me? GTR Register Member Join Date: Jun 2005 Location: uk Posts: 161	price please for f Con navigator for v pro V.3.24

24th February 2008, 04:09 PM	#157 (permalink)
balloo2u GTR Register Member Join Date: Feb 2008 Location: Bedfont, West London Posts: 6	Hello, Would it be possible to get a quote for these? Rays Gram Light 57S Pro Titanium Lip (18" or 19") to fit R34 GTT and just to throw it out there, a quote for the Carbon Alloys I have seen floating around.

2nd March 2008, 10:39 AM	#161 (permalink)
rogerdavis GTR Register Member Join Date: Feb 2008 Posts: 154	A new R32 GTR std Bonnet? how much inc shipping.

2nd March 2008, 11:33 AM	#162 (permalink)
balloo2u GTR Register Member Join Date: Feb 2008 Location: Bedfont, West London Posts: 6	Sorry bud, Couldnt wait, went with the ultralite GT-II's in the end. Would still be interested in a quote though.