7th July 2007, 10:26 AM
|
#1 (permalink) |
|
GTR Register Member
Join Date: Sep 2006
Location: Endless desu
Posts: 833
|
ENDLESS 900hp R32 GTR for sale
It is a present spec.
・HKS 1mm oversize and forge pistons ・HKS H section Conrod ・HKS full counter crank shaft ・Mass oil pan(old model) ・Oil pan baffle plate ・Block cement ・HKS reinforced oil pump ・R33GT-R N-1 water pump ・Combustion chamber processing ・Port processing ・HKS cam 290°/290°(Step3) ・HKS valve spring ・HKS valve retainer ・HKS valve riftar ・HKS cam Sprocket ・HKS GT3037S turbine ×2 ・HKS racing waist gate ×2 ・HKS stainless steel EX manifold ・Trust surge tank ・Trust Racing intercooler of four layers ・Oil cooler ・HKS 6speed mission ・HKS triple plate clutch ・Trust oil cooler ・720cc injector ・440cc addition injector ×6 ・Nismo fuel regulator ・HKS Drag damper KIT ・Bosch pump ×2 ・Fuel collector tank ・Line lock ・HKS racing muffler(100Ф) ・Carbon bonnet (Some lacque has pealed off) ・Aero mirror ・ABS cancellation ・Hi-cas cancellation ・Air conditioner Res ・Rear and various arms ・HKS F-con Vpro ・HKS EVC EZ ・HKS boost gauge ×2 ・HKS exhaust thermometer ・HKS oil pressure meter ・HKS oil temperature gauge ・HKS water temperature meter ・HKS fuel meter ・HKS voltmeter ・Roll bar(5p) ・Rear LSD ATS ・Reception desk LSD ATS ・Rear member color ・17-inch aluminum wheel ・Gddoritti DOT tire .... It is this spec and about 850hp. 900hp is mapped and these parts are added. ・Super-surge tank ・Big diameter throttle ・1000cc injector ・Brake line making ・Fcon Pro mapping The engine room is made beautiful by Endless.  OS Giken sequential can be added at extra cost!! £16,500 (including additional tuning) shipped to EU.         |
|
|
|
16th September 2007, 08:42 PM
|
#3 (permalink) |
|
GTR Register Member
Join Date: Jul 2007
Posts: 130
|
is the car be sorted out by endless befor sale, or will it be sold as seen on the pictures? I love the specs, but the trashy jap style puts me off. Why put all this effort and money into making such a beast but don't give a rats ass if it looks like trash? I don't understand this mentality to be honest.
|
|
|
|
|
18th September 2007, 02:31 AM
|
#5 (permalink) | |
|
GTR Register Member
Join Date: Sep 2006
Location: Endless desu
Posts: 833
|
Quote:
It runs 9s, (With a bad driver) |
|
|
|
|
|
18th September 2007, 07:00 AM
|
#8 (permalink) | |
|
GTR Register Member
Join Date: Sep 2006
Location: Endless desu
Posts: 833
|
Quote:
The engine is cement filled, so running lower power doesnt mean you can drive it on the street on boost with out the oil temp rising very quickly. The drag engine is a pro drag engine....not a road car. We can further ture the engine for any race gas and boost you will need. to make the car over 1000hp we need to change the compression of the engine, cut the head, and correct the valves, change the exhaust housing, remap. OR We can install a race engine for you, say 700hp with out a cement block. and change the spec of the car for a similar price. Need a quick decision on this car, as we are in the process of removing the engine to overhaul, it may not go back in, we may install a race engine. Rick |
|
|
|
|
|
18th September 2007, 07:15 AM
|
#9 (permalink) |
|
GTR Register Member
Join Date: Jul 2007
Posts: 130
|
Rick: I thought it was a street car? I'm not looking for a drag car, but a street MONSTER. I'm selling my 2530's fitted R32 and will be looking for some serious power. It would be cheaper to buy a car like this than build it from scratch.. Do you have a streetable high powered car in sight, or do you only do drag cars?
|
|
|
|
|
18th September 2007, 08:01 AM
|
#10 (permalink) | |
|
GTR Register Member
Join Date: Sep 2006
Location: Endless desu
Posts: 833
|
Quote:
Similar price, but with some body changes, bonnet painted, trunk and spoiler changed. Will be made to fast circuit car. will be a cheaper price Rick |
|
|
|
|
|
18th September 2007, 08:29 AM
|
#11 (permalink) |
|
GTR Register Member
Join Date: Jul 2007
Posts: 130
|
What kind of bhp are you aiming for with the street engine?
Will it still be with the HKS tranny etc? As mentioned I'm looking for a high powered street car, 750bhp+ let me know mate. Last edited by KDW; 18th September 2007 at 08:32 AM. |
|
|
|
|
18th September 2007, 09:06 AM
|
#12 (permalink) | |
|
GTR Register Member
Join Date: Sep 2006
Location: Endless desu
Posts: 833
|
Quote:
HKS 2.8ltr 1989 R32 Block T78-33d running 2.0bar boost between 700-750hp Mission choice is down to customer We have Normal (If customer already has own mission in country) We have HKS H pattern We have Used OS sequential (Overhauled) We have New OS transmission Rick |
|
|
|
|
|
18th September 2007, 06:26 PM
|
#13 (permalink) |
|
GTR Register Member
Join Date: Oct 2004
Location: Scotchland
Posts: 151
 |
Sounds like a VERY good deal for someone, no matter what state of tune it's sold in.
 Do you guys actually have a stocklist of what you have in the UK, or are they normally sold by the time they are shipped from Japan? And how often do you update your website stocklist.  Last edited by DRAGandDRIFT; 21st September 2007 at 11:24 AM. |
|
|
|
|
21st September 2007, 11:25 AM
|
#14 (permalink) | |
|
GTR Register Member
Join Date: Sep 2006
Location: Endless desu
Posts: 833
|
Quote:
We offer very competitive building services. We are making anew home page now, which will have our cars and parts for sale. Rick rick@endless-r.co.jp |
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
