new clutch - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

rushamc · 6th August 2007, 12:23 PM

i need a new clutch for my r33 gtr.

how much should it cost in labour roughly? and can you recommend any garages near buckinghamshire anyone.

thanks

Amar

Alan · 6th August 2007, 12:57 PM

Labour approx 200 - 250 me thinks depending on where you go

rushamc · 6th August 2007, 04:00 PM

is this a job any decent mechanic should be able to do or is it a specialist job?

rushamc · 6th August 2007, 04:02 PM

does anyone know any decent garages near buckinghamshire?

Jim27 · 8th August 2007, 12:49 PM

Any competent mechanic should be able to do it. Experienced greasemoneky

should take about 4 hours. Someone learning as they go will probably take a bit longer.

Jim27 · 21st August 2007, 04:27 PM

FWIW RB supplied and fitted new plates and a new release bearing to my Nismo GMAX twin plate - all done for £580.

6th August 2007, 12:23 PM	#1 (permalink)
rushamc GTR Register Member Join Date: Apr 2006 Posts: 230	new clutch i need a new clutch for my r33 gtr. how much should it cost in labour roughly? and can you recommend any garages near buckinghamshire anyone. thanks Amar

6th August 2007, 12:57 PM	#2 (permalink)
Alan GTROC Member 018 Join Date: Jul 2001 Location: London & Dubai Posts: 4,613	Labour approx 200 - 250 me thinks depending on where you go __________________ ----------------------------------------------------------- R33 GTR Standard Clutch Plate For Sale/Offers My bike,s got more BHP than most!!!! Don't make me get the bike out YOU WILL LOSE!!! SKYLINE FAQs Visit Alan,s GT-R Home Page

6th August 2007, 04:00 PM	#3 (permalink)
rushamc GTR Register Member Join Date: Apr 2006 Posts: 230	clutch is this a job any decent mechanic should be able to do or is it a specialist job?

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

6th August 2007, 04:02 PM	#4 (permalink)
rushamc GTR Register Member Join Date: Apr 2006 Posts: 230	does anyone know any decent garages near buckinghamshire?

8th August 2007, 12:49 PM	#5 (permalink)
Jim27 GTR Register Member Join Date: Jul 2004 Location: Bolton Posts: 4,470	Any competent mechanic should be able to do it. Experienced greasemoneky should take about 4 hours. Someone learning as they go will probably take a bit longer.

21st August 2007, 04:27 PM	#6 (permalink)
Jim27 GTR Register Member Join Date: Jul 2004 Location: Bolton Posts: 4,470	FWIW RB supplied and fitted new plates and a new release bearing to my Nismo GMAX twin plate - all done for £580.