*`UPRATED FRONT DRIVE SHAFTS`* - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

EndlessR · 6th January 2008, 10:16 AM

We are now making strong front driveshaft as asked for by some of you in a previous thread.

They are made from special chromium-molybdenum steel

Would like to get an idea of who would be interested in them.

Please add your member name below so we can work out a good price if there is a few people.

Can make single shafts but expensive.

1: "Member name"

Rain · 8th January 2008, 08:32 PM

...DAMN YOU RICK!

1.Rain (depends on how the price turns out)

SR BEAST · 8th January 2008, 09:50 PM

Can you guys make rear shafts for the R33 GT-R too ?

I broke em' twice at the drag

EndlessR · 9th January 2008, 12:37 AM

Quote:

Originally Posted by Rain

...DAMN YOU RICK!

1.Rain (depends on how the price turns out)

hi mate you dont need them, but will keep you in the picture if we get enough people interested if they become affordable.

EndlessR · 9th January 2008, 12:38 AM

Quote:

Originally Posted by SR BEAST

Can you guys make rear shafts for the R33 GT-R too ?

I broke em' twice at the drag

Yes we can, but will need to see if there is enough interest to get the cost down.

LivingMovie · 9th January 2008, 07:00 PM

R32? If so

1.Rain (depends on how the price turns out)
2.LivingMovie

Jonne · 9th January 2008, 10:47 PM

1.Rain (depends on how the price turns out)
2.LivingMovie
3.Jonne (depends on how the price turns out)

thegosson · 10th January 2008, 02:59 AM

what weight are these shafts?

SkylineMannen · 14th January 2008, 02:10 AM

1.Rain (depends on how the price turns out)
2.LivingMovie
3.Jonne (depends on how the price turns out)
4.SkylineMannen (depends on how the price turns out)

JBwangan · 14th January 2008, 09:46 AM

I'm very interested for my R34. I am in the states though. Any problem with shipping to the US?

EndlessR · 15th January 2008, 10:44 AM

Update time, We need 10 people, I will PM you the prices if you add your name.

1.Rain (depends on how the price turns out)
2.LivingMovie
3.Jonne (depends on how the price turns out)
4.SkylineMannen (depends on how the price turns out)
5. Masuda san (endless-r number 2 drag customer)
6.
7.
8.
9.
10.

GTRRRR · 28th January 2008, 09:06 AM

Rick im keen ,GTRRRR.............sydney aus

price in yen pls

icydude · 7th March 2008, 01:54 PM

this ever go?

and rough cost estimate? I can get a set stateside if need be anyways.

Levi_501 · 7th March 2008, 10:15 PM

Very interested, but obviously some idea of price would determine my level of interest.

ShaggyR32GTR · 11th March 2008, 09:44 PM

Yes mate interested for 32GT-R. Let me know the price. Thanks

6th January 2008, 10:16 AM	#1 (permalink)
EndlessR GTR Register Member Join Date: Nov 2007 Location: Kobe Posts: 778	*`UPRATED FRONT DRIVE SHAFTS`* We are now making strong front driveshaft as asked for by some of you in a previous thread. They are made from special chromium-molybdenum steel Would like to get an idea of who would be interested in them. Please add your member name below so we can work out a good price if there is a few people. Can make single shafts but expensive. 1: "Member name" Last edited by EndlessR; 6th January 2008 at 10:41 AM.

8th January 2008, 08:32 PM	#2 (permalink)
Rain GTROC Member Join Date: Apr 2006 Posts: 1,825	...DAMN YOU RICK! 1.Rain (depends on how the price turns out) __________________ 016 Project Deus Ex Machina - Endless-R GTR-32

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

8th January 2008, 09:50 PM	#3 (permalink)
SR BEAST GTR Register Member Join Date: Mar 2005 Posts: 258	Can you guys make rear shafts for the R33 GT-R too ? I broke em' twice at the drag

9th January 2008, 07:00 PM	#6 (permalink)
LivingMovie GTR Register Member Join Date: Oct 2006 Location: Sask. Canada Posts: 125	R32? If so 1.Rain (depends on how the price turns out) 2.LivingMovie

9th January 2008, 10:47 PM	#7 (permalink)
Jonne GTR Register Member Join Date: Nov 2006 Location: Holland Posts: 136	1.Rain (depends on how the price turns out) 2.LivingMovie 3.Jonne (depends on how the price turns out)

10th January 2008, 02:59 AM	#8 (permalink)
thegosson GTR Register Member Join Date: Jun 2007 Location: IRELAND Posts: 293	what weight are these shafts?

14th January 2008, 02:10 AM	#9 (permalink)
SkylineMannen New Users Join Date: Aug 2003 Location: Sthlm Sweden Posts: 177	1.Rain (depends on how the price turns out) 2.LivingMovie 3.Jonne (depends on how the price turns out) 4.SkylineMannen (depends on how the price turns out)

14th January 2008, 09:46 AM	#10 (permalink)
JBwangan GTROC Member Join Date: Oct 2006 Location: In my own head. Posts: 276	I'm very interested for my R34. I am in the states though. Any problem with shipping to the US?

15th January 2008, 10:44 AM	#11 (permalink)
EndlessR GTR Register Member Join Date: Nov 2007 Location: Kobe Posts: 778	Update time, We need 10 people, I will PM you the prices if you add your name. 1.Rain (depends on how the price turns out) 2.LivingMovie 3.Jonne (depends on how the price turns out) 4.SkylineMannen (depends on how the price turns out) 5. Masuda san (endless-r number 2 drag customer) 6. 7. 8. 9. 10.

28th January 2008, 09:06 AM	#12 (permalink)
GTRRRR GTR Register Member Join Date: Oct 2002 Location: sydney australia Posts: 18	Rick im keen ,GTRRRR.............sydney aus price in yen pls

7th March 2008, 01:54 PM	#13 (permalink)
icydude GTR Register Member Join Date: Nov 2006 Posts: 384	this ever go? and rough cost estimate? I can get a set stateside if need be anyways.

7th March 2008, 10:15 PM	#14 (permalink)
Levi_501 GTR Register Member Join Date: Jan 2006 Location: London Posts: 251	Very interested, but obviously some idea of price would determine my level of interest.

11th March 2008, 09:44 PM	#15 (permalink)
ShaggyR32GTR GTROC Member Join Date: Feb 2008 Location: Bournemouth Posts: 93	Yes mate interested for 32GT-R. Let me know the price. Thanks