2 x S13 facelift shells one black one white - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

james rayner · 1st February 2008, 12:59 PM

going to need to shift these rather urgently now

firstly the white one

its a 94L-reg
log book here with it
MOT until about may i think
tax just run out

it currently has an engine and gearbox fitted, the engine had just been rebuilt and was running fine until it suddenlly lost all oil pressure and decided to give up on me , found some gravel in the oil return for the turbo so that ought to do it

for sale without the engine and gearbox but another 75pound can have them aswell

if the car is being bought as a drift project then you will be wanting some spare wheels and tyres to destroy and dispose of, for an extra 100pound i will throw in about 15-20 s13 wheels and a set of 17" momo arrow wheels one cracked the other 3 are fine

the body work isnt great but isnt too bad, needs a plate on the drivers side front chassis rail, the drivers door and sill are bent in slightly but could easily be pulled or replaced, i could throw in a sill for the buyer to use to repair if they wanted (id personally buy it and drift then crash it ) the boot has been despoilered and repaired is in fantastic condition

all suspension and brakes etc are there, some interior stirpped out but i do have all interior pannels from my s13 in my garage if the buyer wants them, not really worth it tho if its a drifcar, only bits missing will be engine gearbox diff radiator and exhaust, all of which can be picked up very cheaply on here

looking for 250pound for the rolling shell, will sell the shell with engine box and all the wheels for 400pound

it also has a norris designs wingmount intercooler and HKS FCD installed that i dont have the time to remove so will go with it (worth 100pound alone)

and the black one

this has been my pride and joy for a looong time now, many many many fond memories of this car and will be trully gutted to see her go (especially as she is once again so close to completion ) but EVERYTHING must go now! ! !

the car currently has a working CA fitted and ive just spent fooking ages rebuilding this car up again for the 1000th time but ill never get the money i need if i sell it with the parts fitted to it, if your looking for lots of parts and an almost finished S13 then get in touch and we may be able to sort something out.

it needs the sills welding and i have had some new sills made up at an engineering place that will come with the car, they just need fitting.

the back half of the car has been rust treated and undersealed (not a fun job on a gravel driveway but its done, the front half hasnt and wont be done before i sell it but isnt needed to be done either but if i was keeping it i would do

just fitted new brake lines and new clutch line, new tie rod ends, inside has been stripped and painted, boot has been filled and painted but there is a crak in it now, not too bad though. currently on 5stud running gear but will be sold on 4 stud stuff.

i have just actually stripped, cleaned, primered and re-painted the engine bay aswell

price im after 350pound for it without the engine

the same offer applies to this one as the white one and i can do a deal with LOTS of drifty wheels etc engines the lot, everything must go ASAP

they are located in holme upon spalding moor in east yorkshire 10mins from Junction 37 M62

cheers

james

james rayner · 1st February 2008, 01:00 PM

james rayner · 1st February 2008, 01:02 PM

james rayner · 1st February 2008, 03:21 PM

just thought i would try and make the pricing a little clearer

White shell with, MOT, norris wingmount + HKS FCD 250pound

Black shell, rust treated/undersealed, new sills ready to fit. 350pound

CA18DET engine, box, clutch etc (big ends gone) 75 pound

CA18DET 70,000 engine, box, clutch, alternator, starter, T25 with norris actuator 450pound

A huge mass of wheels, mainly facelift, + 4 17" momo arrows (over 20wheels i reckon)100pound

Gmax lowering springs + koni adjustable rear shocks 150pound

Will do white shell with, all the wheels, the springs/shocks CA with big ends gone for 500pound, black shell with that lot for 600pound

Prices for above but with working CA + turbo etc. same but + 350pound

and theres many other bits available too

james rayner · 3rd February 2008, 01:05 PM

bump ! ! !

james rayner · 3rd February 2008, 04:47 PM

Black shell now sold ! ! ! ! ! !

white shell + all the wheels + gmax springs and koni shocks + both engines still available.

craigce · 10th February 2008, 11:49 AM

hi would you sell the actuator seperatly im in need of one thanks.

james rayner · 10th February 2008, 06:28 PM

how much would you want to pay for it as ive got the turbo and actuator up for 100pound + postage

craigce · 10th February 2008, 07:39 PM

hi that sounds good what condition is the turbo in would i be able to come and pick it up i live in goole.

craigce · 18th February 2008, 01:51 PM

hi do you still have the turbo and actuator if so when if its posible could i come and pick it up.

1st February 2008, 12:59 PM	#1 (permalink)
james rayner GTR Register Member Join Date: Oct 2007 Location: York Posts: 99	2 x S13 facelift shells one black one white going to need to shift these rather urgently now firstly the white one its a 94L-reg log book here with it MOT until about may i think tax just run out it currently has an engine and gearbox fitted, the engine had just been rebuilt and was running fine until it suddenlly lost all oil pressure and decided to give up on me , found some gravel in the oil return for the turbo so that ought to do it for sale without the engine and gearbox but another 75pound can have them aswell if the car is being bought as a drift project then you will be wanting some spare wheels and tyres to destroy and dispose of, for an extra 100pound i will throw in about 15-20 s13 wheels and a set of 17" momo arrow wheels one cracked the other 3 are fine the body work isnt great but isnt too bad, needs a plate on the drivers side front chassis rail, the drivers door and sill are bent in slightly but could easily be pulled or replaced, i could throw in a sill for the buyer to use to repair if they wanted (id personally buy it and drift then crash it ) the boot has been despoilered and repaired is in fantastic condition all suspension and brakes etc are there, some interior stirpped out but i do have all interior pannels from my s13 in my garage if the buyer wants them, not really worth it tho if its a drifcar, only bits missing will be engine gearbox diff radiator and exhaust, all of which can be picked up very cheaply on here looking for 250pound for the rolling shell, will sell the shell with engine box and all the wheels for 400pound it also has a norris designs wingmount intercooler and HKS FCD installed that i dont have the time to remove so will go with it (worth 100pound alone) and the black one this has been my pride and joy for a looong time now, many many many fond memories of this car and will be trully gutted to see her go (especially as she is once again so close to completion ) but EVERYTHING must go now! ! ! the car currently has a working CA fitted and ive just spent fooking ages rebuilding this car up again for the 1000th time but ill never get the money i need if i sell it with the parts fitted to it, if your looking for lots of parts and an almost finished S13 then get in touch and we may be able to sort something out. it needs the sills welding and i have had some new sills made up at an engineering place that will come with the car, they just need fitting. the back half of the car has been rust treated and undersealed (not a fun job on a gravel driveway but its done, the front half hasnt and wont be done before i sell it but isnt needed to be done either but if i was keeping it i would do just fitted new brake lines and new clutch line, new tie rod ends, inside has been stripped and painted, boot has been filled and painted but there is a crak in it now, not too bad though. currently on 5stud running gear but will be sold on 4 stud stuff. i have just actually stripped, cleaned, primered and re-painted the engine bay aswell price im after 350pound for it without the engine the same offer applies to this one as the white one and i can do a deal with LOTS of drifty wheels etc engines the lot, everything must go ASAP they are located in holme upon spalding moor in east yorkshire 10mins from Junction 37 M62 cheers james

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

1st February 2008, 01:00 PM	#2 (permalink)
james rayner GTR Register Member Join Date: Oct 2007 Location: York Posts: 99

1st February 2008, 01:02 PM	#3 (permalink)
james rayner GTR Register Member Join Date: Oct 2007 Location: York Posts: 99

1st February 2008, 03:21 PM	#4 (permalink)
james rayner GTR Register Member Join Date: Oct 2007 Location: York Posts: 99	just thought i would try and make the pricing a little clearer White shell with, MOT, norris wingmount + HKS FCD 250pound Black shell, rust treated/undersealed, new sills ready to fit. 350pound CA18DET engine, box, clutch etc (big ends gone) 75 pound CA18DET 70,000 engine, box, clutch, alternator, starter, T25 with norris actuator 450pound A huge mass of wheels, mainly facelift, + 4 17" momo arrows (over 20wheels i reckon)100pound Gmax lowering springs + koni adjustable rear shocks 150pound Will do white shell with, all the wheels, the springs/shocks CA with big ends gone for 500pound, black shell with that lot for 600pound Prices for above but with working CA + turbo etc. same but + 350pound and theres many other bits available too

3rd February 2008, 01:05 PM	#5 (permalink)
james rayner GTR Register Member Join Date: Oct 2007 Location: York Posts: 99	bump ! ! !

3rd February 2008, 04:47 PM	#6 (permalink)
james rayner GTR Register Member Join Date: Oct 2007 Location: York Posts: 99	Black shell now sold ! ! ! ! ! ! white shell + all the wheels + gmax springs and koni shocks + both engines still available.

10th February 2008, 11:49 AM	#7 (permalink)
craigce New Users Join Date: Feb 2008 Location: goole Posts: 3	hi would you sell the actuator seperatly im in need of one thanks.

10th February 2008, 06:28 PM	#8 (permalink)
james rayner GTR Register Member Join Date: Oct 2007 Location: York Posts: 99	how much would you want to pay for it as ive got the turbo and actuator up for 100pound + postage

10th February 2008, 07:39 PM	#9 (permalink)
craigce New Users Join Date: Feb 2008 Location: goole Posts: 3	hi that sounds good what condition is the turbo in would i be able to come and pick it up i live in goole.

18th February 2008, 01:51 PM	#10 (permalink)
craigce New Users Join Date: Feb 2008 Location: goole Posts: 3	hi do you still have the turbo and actuator if so when if its posible could i come and pick it up.