GT-R Register - Official Nissan Skyline and GTR Owners Club forum - View Single Post

Stony · 21st June 2008, 06:52 AM

Hello,

Not a gtr owner but do have a rb26 in an old school 240z using HKS Vpro.

My tuner is looking into it but i thought i would ask around to.

Is there a way to utilize the 2 step without having some kind of speed sensor???? I only want to use the 2 step at this point to build boost on a transbrake. So I'm wondering if you could use the actually trans brake circuit to control the 2 step?

Any help would be much appreciated

Stony

BTW here is a video off the car and motor. Its going to the dyno tomorro for final tune after a bottom end rebuild.

21st June 2008, 06:52 AM	#1 (permalink)
Stony GTR Register Member Join Date: Sep 2007 Posts: 64	Vpro 2 step/launch control Hello, Not a gtr owner but do have a rb26 in an old school 240z using HKS Vpro. My tuner is looking into it but i thought i would ask around to. Is there a way to utilize the 2 step without having some kind of speed sensor???? I only want to use the 2 step at this point to build boost on a transbrake. So I'm wondering if you could use the actually trans brake circuit to control the 2 step? Any help would be much appreciated Stony BTW here is a video off the car and motor. Its going to the dyno tomorro for final tune after a bottom end rebuild.