Default geometry set to circuit - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

tokyogtr · 20th May 2008, 10:45 AM

I spoke with Nissan about the handling problems and they said it might be due to the default factory settings being circuit mode. still, i think this is not enough to cause the issues i had at the weekend so i'm going to ignore them and go with a mine's solution which i know a) can be adapted for the road properly and b) is 2 secs a lap quicker at tsukuba.

For everyone else out there with a gt-r at least you now know there is another geo setting that can be used. If you never intend to use it on the circuit then i suggest changing the geo. Unfortunately only the HPC has the settings and i have no idea what they are.

KingAbarth · 20th May 2008, 11:20 AM

do you know if they change caster, camber and toe settings or just one of the settings?

tokyogtr · 20th May 2008, 11:25 AM

the settings are in this link: First service today

i'm assuming they change everything.

Jspeed · 20th May 2008, 11:55 AM

What is Mine's solution? I just bought their Eibach springs but did they change geometry too?

20th May 2008, 10:45 AM	#1 (permalink)
tokyogtr GTROC Member Join Date: Feb 2008 Location: Tokyo Posts: 1,167	Default geometry set to circuit I spoke with Nissan about the handling problems and they said it might be due to the default factory settings being circuit mode. still, i think this is not enough to cause the issues i had at the weekend so i'm going to ignore them and go with a mine's solution which i know a) can be adapted for the road properly and b) is 2 secs a lap quicker at tsukuba. For everyone else out there with a gt-r at least you now know there is another geo setting that can be used. If you never intend to use it on the circuit then i suggest changing the geo. Unfortunately only the HPC has the settings and i have no idea what they are. __________________ My GTR SUCKS..... air.... then big shiny turbos force it into the engine.

20th May 2008, 11:25 AM	#3 (permalink)
tokyogtr GTROC Member Join Date: Feb 2008 Location: Tokyo Posts: 1,167	the settings are in this link: First service today i'm assuming they change everything. __________________ My GTR SUCKS..... air.... then big shiny turbos force it into the engine.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

20th May 2008, 11:20 AM	#2 (permalink)
KingAbarth GTR Register Member Join Date: Mar 2008 Location: Singapore/HongKong/Australia Posts: 50	do you know if they change caster, camber and toe settings or just one of the settings?

20th May 2008, 11:55 AM	#4 (permalink)
Jspeed GTR Register Member Join Date: Mar 2008 Location: Singapura/London Posts: 51	What is Mine's solution? I just bought their Eibach springs but did they change geometry too?