GT-R Register - Official Nissan Skyline and GTR Owners Club forum - View Single Post

LotusGTR · 18th September 2008, 09:54 PM

Hi, I'm looking at buying a set of these calipers and running either a 355mm x 32mm or 365mm x 34mm rotors on the front of my R32 GTR.

Some questions I'm hoping can be answered.

I've got to replace or repair my current brake master cylinder and can go 1" again or move up to the 17/16" size. To figure this out I'd like to know what the piston sizes are for this (6 pot) caliper. Anyone got that data?

Finally, if anyone has done a similar conversion, what did you do and how were the results? I guess I would like to hear about what BMC you used, overall improvement, feedback on the AP caliper / set up, pedal feel, balance with the OEM rears would be good to hear about.

Thank you.

18th September 2008, 09:54 PM	#1 (permalink)
LotusGTR GTR Register Member Join Date: Sep 2008 Location: Australia Posts: 12	AP CP5555 Pot Sizes Hi, I'm looking at buying a set of these calipers and running either a 355mm x 32mm or 365mm x 34mm rotors on the front of my R32 GTR. Some questions I'm hoping can be answered. I've got to replace or repair my current brake master cylinder and can go 1" again or move up to the 17/16" size. To figure this out I'd like to know what the piston sizes are for this (6 pot) caliper. Anyone got that data? Finally, if anyone has done a similar conversion, what did you do and how were the results? I guess I would like to hear about what BMC you used, overall improvement, feedback on the AP caliper / set up, pedal feel, balance with the OEM rears would be good to hear about. Thank you.