vacuum control tube - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

montzz32gtr · 15th July 2008, 07:57 PM

hi , ive done some work to my r32 gtr including taking off recurc pipes and im not 100% sure to where the vacuum control tube went to that i dis, if it was the recurc tubes where should i put it now ?

its 1 of the vacuum tubes that comes round the back of the engine ,
1 is actually a metal water supply . (i know this as ive had turbos off too)
1 splits into 2 and goes to turbo actuators .(this on mine isnt needed any more as ive put profec b boost cont on it so ive blocked it off)
the other i know is the vacuum control tube as r32 gtr manual shows it ,but where should i put it as ive no recurc pipes now (if thats where it did go)
regards steve

GT-R Glenn · 16th July 2008, 12:10 AM

Recirc Remove
Any help ??

montzz32gtr · 16th July 2008, 07:21 PM

hi mate thanks but i also have that diagram and even though it shows it , doesnt show exacly where it goes but much appreciated anyhow , steve

Ian C · 20th July 2008, 09:42 AM

I use this for all VAC work.

Ian

15th July 2008, 07:57 PM	#1 (permalink)
montzz32gtr GTR Register Member Join Date: May 2007 Posts: 121	vacuum control tube hi , ive done some work to my r32 gtr including taking off recurc pipes and im not 100% sure to where the vacuum control tube went to that i dis, if it was the recurc tubes where should i put it now ? its 1 of the vacuum tubes that comes round the back of the engine , 1 is actually a metal water supply . (i know this as ive had turbos off too) 1 splits into 2 and goes to turbo actuators .(this on mine isnt needed any more as ive put profec b boost cont on it so ive blocked it off) the other i know is the vacuum control tube as r32 gtr manual shows it ,but where should i put it as ive no recurc pipes now (if thats where it did go) regards steve

16th July 2008, 07:21 PM	#3 (permalink)
montzz32gtr GTR Register Member Join Date: May 2007 Posts: 121	thanks hi mate thanks but i also have that diagram and even though it shows it , doesnt show exacly where it goes but much appreciated anyhow , steve

20th July 2008, 09:42 AM	#4 (permalink)
Ian C GTROC Member Join Date: Jun 2003 Location: Buckingham Posts: 1,163	I use this for all VAC work. Ian __________________ Winter rebuild complete - Click here to see the 2008 look

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

16th July 2008, 12:10 AM	#2 (permalink)
GT-R Glenn Banned Join Date: Nov 2002 Location: Waiuku NZ Posts: 928	Recirc Remove Any help ??