18th July 2008, 11:52 AM
|
#1 (permalink) |
|
GTR Register Member
Join Date: Aug 2006
Location: Norway
Posts: 79
|
removing oil pump
Hi, what is the easiest way to remove a oil pump from ab RB26 engine? if there are any easy way.
Have blown the sealing in front, and when i take that out, there are some lose bits from what seems to be an bearing behind the oilseal. i now need to take off the oilpump, to see whats wrong in there. im afraid that the oilpump is destroyed. |
|
|
|
20th July 2008, 08:39 PM
|
#2 (permalink) |
|
GTR Register Member
Join Date: May 2004
Location: Rotorua NZ
Posts: 2,198
|
Its not a 5 minute job unfortunatly, its definatly quicker and less hassle to remove the engine and then drop the sump off.
You can't just unbolt the pump and bring it forward in place. Rob
__________________
R34 GTR: Quickest street trim skyline in NZ, 9.7 @ 137 on 1st test pass, first meeting in the UK, 10.4 @ 144. 240z, WRH8.71 / 162 @ 2 bar, stock crank, full street trim 1972 240z, RIPS RB30, quickest/fastest Jap street car in NZ 8.71/162mph 2 bar, No NOS, street tyres. RB engine building, alloy and stainless fabrication, affordable skyline tuning and high capacity repowers, worldwide shipping arranged. e-mail rips@inspire.net.nz www.ripsltd.com 
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
