RB25 head studs - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

Simonh · 25th July 2008, 11:07 AM

Re-fitting my exhuast manifold a few weeks ago I stripped the thread out of the head on the first bolthole

this is one that I had to previously have drilled out and re-tapped when I first got the car into the country so I am unsure if I will be able to just retap it again?

Simon

Steve@React · 25th July 2008, 01:07 PM

I doubt it would re-tap now it has been stripped (twice??) best thing to do now would be to helicoil it.

Simonh · 26th July 2008, 10:21 AM

the first time the stud was drilled out and he re-tapped it 'cos it was a "bit messy" this time it just pulled the stud out as I tightend it up.

I guess I need to find someone who can come out and do it for me

anyone know someone in nottingham?

Simon

Richard Bell · 26th July 2008, 06:51 PM

Buy a recoil kit and you should be able to do it yourself Simon. Have a look on the net and buy a kit.

Recoil thread repair kit - Metric fine Recoil repair kits

You will need a M10x1.25 kit

Richard

Simonh · 26th July 2008, 09:58 PM

Thanks for that I might just give that a try

25th July 2008, 11:07 AM	#1 (permalink)
Simonh GTROC Member Join Date: May 2002 Location: Nottingham Posts: 3,003	RB25 head studs Re-fitting my exhuast manifold a few weeks ago I stripped the thread out of the head on the first bolthole this is one that I had to previously have drilled out and re-tapped when I first got the car into the country so I am unsure if I will be able to just retap it again? Simon __________________ Composite Design Studio webpage Doing it is not enough - it has to be done right. My Auto Journal

26th July 2008, 10:21 AM	#3 (permalink)
Simonh GTROC Member Join Date: May 2002 Location: Nottingham Posts: 3,003	the first time the stud was drilled out and he re-tapped it 'cos it was a "bit messy" this time it just pulled the stud out as I tightend it up. I guess I need to find someone who can come out and do it for me anyone know someone in nottingham? Simon __________________ Composite Design Studio webpage Doing it is not enough - it has to be done right. My Auto Journal

26th July 2008, 09:58 PM	#5 (permalink)
Simonh GTROC Member Join Date: May 2002 Location: Nottingham Posts: 3,003	Thanks for that I might just give that a try __________________ Composite Design Studio webpage Doing it is not enough - it has to be done right. My Auto Journal

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

25th July 2008, 01:07 PM	#2 (permalink)
Steve@React GTROC Member Join Date: May 2006 Location: West Yorkshire Posts: 183	I doubt it would re-tap now it has been stripped (twice??) best thing to do now would be to helicoil it.

26th July 2008, 06:51 PM	#4 (permalink)
Richard Bell GTR Register Member Join Date: Jun 2001 Location: Hampshire Posts: 879	Buy a recoil kit and you should be able to do it yourself Simon. Have a look on the net and buy a kit. Recoil thread repair kit - Metric fine Recoil repair kits You will need a M10x1.25 kit Richard