R33 GT-R Swedish - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

TP_ · 24th April 2008, 05:08 AM

Hello!

Here's a few pics on my car, they are of pretty poor quality but when the car is finished it will roll out for a few photosessions! The pic of the engine bay is how it looked last summer, it's completely different now with a lot of paintwork and some polished stuff.

The engine broke down last summer, and is now at the end of a rebuilding wich has been expensive. So i hope it will hold out a bit longer this time

.

Here's the specs!

Engine&clutch (more below):

Thrust exhaust
Custom downpipe
Custom manifold (xspower)
HKS oil radiator
HKS oilrelocation kit
Pipercross Breeather
Apexi 4 row IC
Autronic SM2 with cdi ignition
Nismo 600 cc injectors
Nismo fuelpump
Tial wastegate 44mm
Tial bow 50mm
N1 Waterpump
A BIG alu-radiator with flexalite fankit (2 electric fans)
Tomei Poncams 260/9.15
Tomei, timing belt things.. Those which are atatched to the cams
ARP bolted head
Exedy clutch 2disc

This has been bought and done this winter to my the engine!:

R34 GT-R -02 engine block -87mm newly drilled and horned
CP pistons weightadjusted&balanced
Verdi rods weightadjusted&balanced
Hardened crank, and balanced
Tomei oilpump & restrictors (1.5mm front&rear)
Tomei buffleplate kit
ACL Calico coated main&rod bearings
Nismo Timing belt
Greddy oilcatchtank
Tomei 1.5mm MLS
The head is cleaned and measured
NEW Garrett GT35R .62a/r
The oil pan has been expanded with 1.9l
Also a external 13mm oilreturn from the head
And lot more..

Chassies:

Cusco coilovers
Nismo strut braces front&rear uniballs etc etc.. there's more stuff but i have no idea of what they names are in english

18"*9.5" Ace with 265-35/18" Yokohama Advan A048.
DBA brake discs with Porsche brakes. Carbotech break pads, same thing here there's more things i don't know the name of. CE28N 19*9.5 is planned in this summer to fill out a bit more. Also a paintjob to white is planned but that can wait until next winter.

Complete doluck, with carbon hood and rear wing (painted).

bkvj · 24th April 2008, 07:28 AM

thats mindblowing!

wow!! jaw droppingly beautiful!

VGLover · 24th April 2008, 12:20 PM

Nice engine, Now just take the body kit off.

NBM33 · 24th April 2008, 02:20 PM

Quote:

Originally Posted by VGLover

Nice engine, Now just take the body kit off.

Not to your taste then?.....

bkvj · 24th April 2008, 02:34 PM

Quote:

Originally Posted by VGLover

Nice engine, Now just take the body kit off.

i think the Do luck kit looks quite nice actually, i suppose the owner does aswell!

Hugo · 24th April 2008, 02:37 PM

The kit is on the edge, especially the front bumper but I do quite like it!

Nice car mate!

Oskarsson · 24th April 2008, 07:08 PM

You must paint it White mate.Show uss the photo you did on Photoshop.

TP_ · 24th April 2008, 07:14 PM

Never in my life that i would take this bodykit off

, without theese "fat" skirts etc the R33 sometimes looks a bit naked.

Oskarsson, Yes (ja) capten!

Hugo · 24th April 2008, 10:43 PM

White is the best color for the R33

MacGTR · 24th April 2008, 10:55 PM

It does look much better in white. Only bad point is the wing as it is a bit too big for me but very nice spec and turbo. Have fun with it

Zabijak · 24th April 2008, 11:39 PM

Nice but dude, having porsche written all over your brakes is just wrong!

plumwerks · 25th April 2008, 05:19 AM

Actually the white looks really good.

TP_ · 29th April 2008, 04:21 AM

Thanks for the comments

,
2 of my better friends are carpainters, so it's cheap to get it resprayed with good results.

TP_ · 7th May 2008, 04:33 AM

Anyone here got an idea of what make these rims could be? They were fitted on my car when it came to Sweden, big mistake that the owner back then thought they were ugly and sold them to an metal industry.

I would really like to find similar rims to mine, of course 19" as they are on these 2 pics.

frostmotorsport · 7th May 2008, 04:51 AM

good to see another R33 on here!! bodykit not to my taste - well, tbh, the front bumper is the thing I don't like, but welcome aboard!

24th April 2008, 05:08 AM	#1 (permalink)
TP_ GTR Register Member Join Date: Jan 2008 Location: Sweden Posts: 41	R33 GT-R Swedish Hello! Here's a few pics on my car, they are of pretty poor quality but when the car is finished it will roll out for a few photosessions! The pic of the engine bay is how it looked last summer, it's completely different now with a lot of paintwork and some polished stuff. The engine broke down last summer, and is now at the end of a rebuilding wich has been expensive. So i hope it will hold out a bit longer this time . Here's the specs! Engine&clutch (more below): Thrust exhaust Custom downpipe Custom manifold (xspower) HKS oil radiator HKS oilrelocation kit Pipercross Breeather Apexi 4 row IC Autronic SM2 with cdi ignition Nismo 600 cc injectors Nismo fuelpump Tial wastegate 44mm Tial bow 50mm N1 Waterpump A BIG alu-radiator with flexalite fankit (2 electric fans) Tomei Poncams 260/9.15 Tomei, timing belt things.. Those which are atatched to the cams ARP bolted head Exedy clutch 2disc This has been bought and done this winter to my the engine!: R34 GT-R -02 engine block -87mm newly drilled and horned CP pistons weightadjusted&balanced Verdi rods weightadjusted&balanced Hardened crank, and balanced Tomei oilpump & restrictors (1.5mm front&rear) Tomei buffleplate kit ACL Calico coated main&rod bearings Nismo Timing belt Greddy oilcatchtank Tomei 1.5mm MLS The head is cleaned and measured NEW Garrett GT35R .62a/r The oil pan has been expanded with 1.9l Also a external 13mm oilreturn from the head And lot more.. Chassies: Cusco coilovers Nismo strut braces front&rear uniballs etc etc.. there's more stuff but i have no idea of what they names are in english 18"9.5" Ace with 265-35/18" Yokohama Advan A048. DBA brake discs with Porsche brakes. Carbotech break pads, same thing here there's more things i don't know the name of. CE28N 199.5 is planned in this summer to fill out a bit more. Also a paintjob to white is planned but that can wait until next winter. Complete doluck, with carbon hood and rear wing (painted). Last edited by TP_; 24th April 2008 at 05:12 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

24th April 2008, 07:28 AM	#2 (permalink)
bkvj GTR Register Member Join Date: Feb 2006 Posts: 4,213	thats mindblowing! wow!! jaw droppingly beautiful!

24th April 2008, 12:20 PM	#3 (permalink)
VGLover GTR Register Member Join Date: Jan 2006 Posts: 37	Nice engine, Now just take the body kit off.

24th April 2008, 02:37 PM	#6 (permalink)
Hugo GTR Register Member Join Date: Oct 2007 Location: Utrecht! Posts: 510	The kit is on the edge, especially the front bumper but I do quite like it! Nice car mate!

24th April 2008, 07:08 PM	#7 (permalink)
Oskarsson GTR Register Member Join Date: Feb 2007 Location: Sweden Posts: 67	You must paint it White mate.Show uss the photo you did on Photoshop.

24th April 2008, 07:14 PM	#8 (permalink)
TP_ GTR Register Member Join Date: Jan 2008 Location: Sweden Posts: 41	Never in my life that i would take this bodykit off , without theese "fat" skirts etc the R33 sometimes looks a bit naked. Oskarsson, Yes (ja) capten!

24th April 2008, 10:43 PM	#9 (permalink)
Hugo GTR Register Member Join Date: Oct 2007 Location: Utrecht! Posts: 510	White is the best color for the R33

24th April 2008, 10:55 PM	#10 (permalink)
MacGTR GTR Register Member Join Date: Dec 2006 Location: Princes Risborough Posts: 1,991	It does look much better in white. Only bad point is the wing as it is a bit too big for me but very nice spec and turbo. Have fun with it

24th April 2008, 11:39 PM	#11 (permalink)
Zabijak GTR Register Member Join Date: Jul 2007 Location: Espoo, Finland Posts: 102	Nice but dude, having porsche written all over your brakes is just wrong!

25th April 2008, 05:19 AM	#12 (permalink)
plumwerks GTR Register Member Join Date: Dec 2006 Location: Montreal, Canada Posts: 331	Actually the white looks really good.

29th April 2008, 04:21 AM	#13 (permalink)
TP_ GTR Register Member Join Date: Jan 2008 Location: Sweden Posts: 41	Thanks for the comments , 2 of my better friends are carpainters, so it's cheap to get it resprayed with good results.

7th May 2008, 04:33 AM	#14 (permalink)
TP_ GTR Register Member Join Date: Jan 2008 Location: Sweden Posts: 41	Anyone here got an idea of what make these rims could be? They were fitted on my car when it came to Sweden, big mistake that the owner back then thought they were ugly and sold them to an metal industry. I would really like to find similar rims to mine, of course 19" as they are on these 2 pics.

7th May 2008, 04:51 AM	#15 (permalink)
frostmotorsport GTR Register Member Join Date: Aug 2007 Location: Wellington, NZ Posts: 763	good to see another R33 on here!! bodykit not to my taste - well, tbh, the front bumper is the thing I don't like, but welcome aboard!