Info on where to get some Front Tie End Rods for the stega - GT-R Register - Official Nissan Skyline and GTR Owners Club forum

bazgtr · 4th June 2008, 07:12 PM

Anybody know of where to get some Front Tie End Rods for the Stegea.

Been quoted £60 each from Nissan and wnated to know if anybody else know of a place to get them or are they the same as another Nissan model like the R33 GTS???

Any help would be grateful.

bazgtr · 10th June 2008, 05:02 PM

Through the lack of replies, Then Nissan is it then.

Fuggles · 11th June 2008, 06:54 AM

Try here: Stagea Owners Club

yokotas13 · 23rd June 2008, 12:38 PM

R33 inners and outers
you will need to cut about an inch and a half off the R33 ones to get the alignment right. they are super long.

im using Uras R33 inners, and Dmax R33 outers

Mr.F · 7th August 2008, 10:45 PM

Had to get an O/S rod end for mine when it arrived - couple of days only. Call me at MJP (Eastern Auto) - I order from Nissan daily for our Z and ZX business and can do the same discounts for you Stagea owners. 15% off the tie rod end for example...

RSVFOUR · 7th August 2008, 11:26 PM

You can order the right ones through Nissan - doesnt take too long.

It is more likely that r33 gtr parts will fit (rather than r33gts)

4th June 2008, 07:12 PM	#1 (permalink)
bazgtr GTR Register Member Join Date: Aug 2004 Location: SWANSEA Posts: 685	Info on where to get some Front Tie End Rods for the stega Anybody know of where to get some Front Tie End Rods for the Stegea. Been quoted £60 each from Nissan and wnated to know if anybody else know of a place to get them or are they the same as another Nissan model like the R33 GTS??? Any help would be grateful.

11th June 2008, 06:54 AM	#3 (permalink)
Fuggles GTR Register Member Join Date: Jul 2001 Location: UK Posts: 15,708	Try here: Stagea Owners Club __________________ . GTROC chairman Please feel free to contact me with any GTROC questions send an email to info@gtr.co.uk or send a PM

7th August 2008, 11:26 PM	#6 (permalink)
RSVFOUR GTROC Member Join Date: May 2006 Location: On the wall MAY 2008 Posts: 673	You can order the right ones through Nissan - doesnt take too long. It is more likely that r33 gtr parts will fit (rather than r33gts) __________________ RSV Four FFC (Flying Fridge Carrier...... now with twin turbos)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10th June 2008, 05:02 PM	#2 (permalink)
bazgtr GTR Register Member Join Date: Aug 2004 Location: SWANSEA Posts: 685	Through the lack of replies, Then Nissan is it then.

23rd June 2008, 12:38 PM	#4 (permalink)
yokotas13 GTR Register Member Join Date: Nov 2006 Posts: 76	R33 inners and outers you will need to cut about an inch and a half off the R33 ones to get the alignment right. they are super long. im using Uras R33 inners, and Dmax R33 outers

7th August 2008, 10:45 PM	#5 (permalink)
Mr.F GTR Register Member Join Date: Aug 2007 Location: Brentwood Posts: 8	Had to get an O/S rod end for mine when it arrived - couple of days only. Call me at MJP (Eastern Auto) - I order from Nissan daily for our Z and ZX business and can do the same discounts for you Stagea owners. 15% off the tie rod end for example...