GT-R Register - Nissan Skyline and GT-R Drivers Club forum

GT-R Register - Nissan Skyline and GT-R Drivers Club forum (https://www.gtr.co.uk/forum/)
-   General Nissan R35 GT-R Chat (https://www.gtr.co.uk/forum/general-nissan-r35-gt-r-chat.html)
-   -   Ecutek and Cobb Tuning Now Available In the North East (https://www.gtr.co.uk/forum/159725-ecutek-cobb-tuning-now-available-north-east.html)

Jm-Imports 6th January 2012 06:42 PM

Ecutek and Cobb Tuning Now Available In the North East
 
Jm-Imports are now pleased to be able to offer Custom Performance Upgrades in the North of England. At Present Northern owners have to travel down south in order to get Performance upgrade packages for there GTR but now at Jm-Imports we can offer the following upgrades. (more detailed thread on stage builds coming soon 650 750 850 1000 or 1200+).


Please note all tuning work is to be done on a Dyno Dynamics Dyno to Setup the Mapping perfectly for each individual car and then tweaked on the road to ensure maximum smoothness and acceleration. All Mapping Work is done by Ryan Griffiths who tunes daily most of the Highest HP Road Cars in Europe.

Ryan has mapped a lot of Jm-Import cars since 2005 including R32,R33,R34 and most recently we build a supra here in the North east which made 930bhp.


Stage 1 – A completely custom remap of a Stock VR38DETT adjusting Fueling, Ignition timing, Cam Angles and Boost target pressures which raise the boost to 1bar to keep exhaust back pressures and exhaust gas temps at a safe level.

For this Stage we normally see an Increase of 10-15% More Power and Torque. Producing a dyno graph like below on one of our customers cars with a JM Stage 1

http://i14.photobucket.com/albums/a3...chy/stage1.jpg


Stage 2 – Requires the fitment of a 76MM Intake kit and Aftermarket Y pipes which are included in the Below Prices. This again includes a completely custom remap of the VR38DETT Engine on the Dyno to suit the above modifications.

For this Stage we normally see an Increase of 20% + More Power and Torque. Producing a dyno graph like below on one of our customers cars with a JM Stage 2


http://i14.photobucket.com/albums/a3...y/e53464e4.jpg


Stage 3 – Requires the fitment of a 76MM Intake kit, Aftermarket Y pipes, Aftermarket Dyno Pipes and 1000cc Injectors which are included in the Below Prices. This again includes a completely custom remap of the VR38DETT Engine on the Dyno to suit the above modifications.

For this Stage we normally see an Increase of 25% + More Power and Torque. Producing a dyno graph like below on one of our customers cars with a JM Stage 3


http://i14.photobucket.com/albums/a3...y/3071009e.jpg


To see a Comparison of the Different Stages, View the following dyno compare site and choose Nissan Skyline.


Dyno Comparison - 2bartuning

Prices for supplying, fitting parts and mapping: -

Stage 1 - tbc soon
Stage 2 - tbc soon
Stage 3 - tbc soon

(customer can also provide their own parts and we can just charge labour on fitting them or just mapping if already fitted)


Prices for mapping as follows-

ENGINE MAPPING -

EcuTek Custom ECM Map - Mapping is carried out on Dyno Dynamics Dyno for safety and proper tuning of engine. After Dyno Session, tweaking on road is provided with customer to ensure power delivery and map suits customer’s needs.


- Independent dyno will be used and all graphs and data will be provided to customer after session.

- Ability to change between maps using Steering wheel buttons

- Ability to change boost level via Steering wheel buttons

- Price below includes EcuTek Licence for ECM, any further tuning after this will be 400 per session on dyno as another license is not required.

650

GEARBOX MAPPING -

EcuTek Custom TCM Map – Includes 2011 Gearbox software which provides the following..

- Smoother gear changes upon warm up and at full working temp,
- Ability to keep Transmission R Mode active in Manual and Auto.
- Removes Low speed bunny hopping
- Gearbox changes down to 1st gear below 4mph rather than wait to 0mph.
- Downshifting is quicker and more positive in relation to paddle request
- Ability to set Clutch points on all years of GTR to ensure changes are positive and slip is set as customer requires
- Fully adjustable Launch control LC1 – LC4 via Cruise control switch see video below for example
- http://www.youtube.com/watch?v=peVCPqRalcw – Thanks to [email protected] for vid

350

We are also still able to do cobb tuning here aswell for customers, like myself who is still using the cobb ap. (new thread to follow on this soon)

[email protected] for bookings or any other info.


Jurgen

H20 MRV 6th January 2012 08:15 PM

Hi Guys,

I just bought my GT-R (todayfrom Nobles Edinburgh) and will be needing a Ecutek re-map and gearbox re-map can you pm me a price please?

I am up the road in Edinburgh and will be looking to get this done in about 15 days once i get back onshore,

I have just bought a Miltek Y Section off Here (thanks Chris) ut will fit that at my friends garage.

Cheers Robin.

rob wild 6th January 2012 11:20 PM

Looks good jurgen! Think you need to get some prices up :) you're a bit far for me but I'm quite lucky with who I have 4 miles from my house anyway :d

enshiu 6th January 2012 11:42 PM

Buying LC4 map from you Jurgen pm me for price.

Jm-Imports 7th January 2012 06:01 PM

As EcuTek are constantly improve coding for the GTR customers can arrange to pop back for updates on set tuning days every month.

A 5% discount applies to the total cost if customers have both ECM and TCM Mapping done at the same time.

Group buy discounts of 10% is also available if more than 4 owners book in for tuning work in set periods when Ryan is with us.

With regards Different Stages pricing we can discuss fitting of your own supplied parts or we can supply and fit parts for you in conjunction for mapping. E-mail or Call for our workshop rates,.

I can maybe start a thread on the north east section for a dyno and mapping day ?

be nice to get 4-5 customers for the day on the dyno.

Jm-Imports 7th January 2012 06:03 PM

Quote:

Originally Posted by H20 MRV (Post 1559229)
Hi Guys,

I just bought my GT-R (todayfrom Nobles Edinburgh) and will be needing a Ecutek re-map and gearbox re-map can you pm me a price please?

I am up the road in Edinburgh and will be looking to get this done in about 15 days once i get back onshore,

I have just bought a Miltek Y Section off Here (thanks Chris) ut will fit that at my friends garage.

Cheers Robin.

robin prices are up above now:cool: if you dont need a dyno printout then we can reduce by 100 but i think it would be nice to test it on dyno aswell.

Jm-Imports 7th January 2012 06:03 PM

Quote:

Originally Posted by enshiu (Post 1559352)
Buying LC4 map from you Jurgen pm me for price.

price above now mate..

H20 MRV 8th January 2012 12:54 AM

Great, I will be in touch when I get home, how about the end of the month for the mapping? :thumbsup:


Quote:

Originally Posted by Jm-Imports (Post 1559619)
robin prices are up above now:cool: if you dont need a dyno printout then we can reduce by 100 but i think it would be nice to test it on dyno aswell.


Visconti 8th January 2012 09:34 AM

Nice Clean Graphs!

Jm-Imports 8th January 2012 09:43 AM

Quote:

Originally Posted by H20 MRV (Post 1559839)
Great, I will be in touch when I get home, how about the end of the month for the mapping? :thumbsup:

no problem send me a PM when you near home and we will arrange date to suit.

ROG350Z 8th January 2012 02:22 PM

Would certainly be up for running my Stage 2 (with Titan and GTC 99 Map) on a dyno and meeting up just to see what it runs now compared with my Y Pipe run at TRL. Let us know a Saturday Jurgen and sure we can arrange a bunch to come down.

Jm-Imports 8th January 2012 04:28 PM

yep i will organise a day for some cars

SamboGrove 8th January 2012 05:05 PM

Quote:

Originally Posted by Jm-Imports (Post 1560008)
yep i will organise a day for some cars

Would be well up for that :thumbsup:

And well done Jurgen. Nice to see some serious competition to sum/Litchfields etc a bit closer to home!

Protegimus 9th January 2012 02:05 AM

Also up for a run.
Do you have a dyno on premise now Jurgen?

See you next Saturday,

Protegimus

Jm-Imports 9th January 2012 11:55 AM

Quote:

Originally Posted by Protegimus (Post 1560256)
Also up for a run.
Do you have a dyno on premise now Jurgen?

See you next Saturday,

Protegimus

we dont mate but we use a nearby one ;-) see you sat.

H20 MRV 10th January 2012 02:09 PM

Sat? I get my new gtr tomorrow! AND the y section is on its way!

Jm-Imports 10th January 2012 02:39 PM

this sat 14th ?

Jm-Imports 10th January 2012 02:53 PM

next saturday is better ie 21st will give me time to book dyno etc.

anybody else want to come 21st ?

H20 MRV 10th January 2012 08:42 PM

The 21st is good for me!

GT-R mini meet and map?

Jm-Imports 10th January 2012 08:45 PM

Quote:

Originally Posted by H20 MRV (Post 1561026)
The 21st is good for me!

GTR-R mini meet and map?

cool i will book the dyno and sort everything tomorrow..

will start a thread see if anybody wants to Join :thumbsup:


All times are GMT. The time now is 05:27 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
http://www.Tyreforums.com


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.